Seeit SUPERPRO-610P Универсальный программатор
Техническая документация
Характеристики
Brand
SeeitТип продукции
Universal Programmer
Подтип
Universal Programmer
Для использования с
EPROM, PLDs, ARM9 32 bit MCU, FLASH
Содержимое комплекта
In-Circuit Debugger/Programmer, Cable
Programmer Name
SUPERPRO-610P
Тип интерфейса
USB 2.0
Стандарты/одобрения
Нет
Страна происхождения
China
Информация о товаре
SUPERPRO 610P, High-Speed Universal Programmer, USB 2.0
The SuperPro-610P is an universal production programmer equipped with ARM9 processor with a USB 2.0 interface. Based on the 48-pin ZIF socket it can program over 32000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages. The programming is extremely fast based on the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. An optional ISP adapter permit to program components soldered on printed circuits or devices in special packages. The software runs under Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64 bits). Updates can be download freely.
PC Based Programmers
Информация о наличии не успела загрузиться
тг 332 724,45
тг 332 724,45 Each (ex VAT)
1
тг 332 724,45
тг 332 724,45 Each (ex VAT)
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
SeeitТип продукции
Universal Programmer
Подтип
Universal Programmer
Для использования с
EPROM, PLDs, ARM9 32 bit MCU, FLASH
Содержимое комплекта
In-Circuit Debugger/Programmer, Cable
Programmer Name
SUPERPRO-610P
Тип интерфейса
USB 2.0
Стандарты/одобрения
Нет
Страна происхождения
China
Информация о товаре
SUPERPRO 610P, High-Speed Universal Programmer, USB 2.0
The SuperPro-610P is an universal production programmer equipped with ARM9 processor with a USB 2.0 interface. Based on the 48-pin ZIF socket it can program over 32000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages. The programming is extremely fast based on the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. An optional ISP adapter permit to program components soldered on printed circuits or devices in special packages. The software runs under Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64 bits). Updates can be download freely.
PC Based Programmers