Техническая документация
Характеристики
Brand
RS ProТип продукции
Реле мониторинга
Фаза электрического тока
1
Конфигурация контактов
SPDT
Тип монтажа
DIN-рейка
Минимальный считываемый ток
1A
Потребляемая мощность
1.4VA
Максимальный считываемый ток
10A
Токовая чувствительность
Undercurrent, Overcurrent
Тип клеммы
Винт
Задержка по времени
0.1 to 30 s
Минимальная рабочая температура
-20°C
Напряжение источника питания переменного тока
230, 24V ac
Ток контактов реле
8A
Максимальная рабочая температура
60°C
Материал каски/сварочной маски
89мм
Длина
66.5мм
Стандарты/одобрения
cUL, EN 61000-6-4, IEC 60664, RoHS
Ширина
17.5мм
Серия
RS PRO
Страна происхождения
United Kingdom
Информация о товаре
Designed for current monitoring, this true RMS (Route Mean Square) multi timer can measure both pure and distorted AC waves. This makes it suitable for environments where currents occur in short pulses, like variable speed motor drives and computers.
It has selectable overcurrent or undercurrent monitoring modes and an adjustable trip level and time delay. The single pole double throw (SPDT) relay is microprocessor-based and boasts high levels of efficiency and speed. Its supply, alarm and relay status are easily viewable with three different coloured LEDs (light-emitting diodes). This component has a 17.5 mm DIN (Deutsches Institut für Normung, or the German Institute for Standardisation) rail housing.
The device is suitable for surfacing mounting using the two clips provided on the rear of the unit. Its flame retardant casing carries UL (Underwriters Laboratories) approval. You'll find the relay conforms to European health, safety and environmental protection legislation for electrical components.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Информация о наличии не успела загрузиться
P.O.A.
1
P.O.A.
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
RS ProТип продукции
Реле мониторинга
Фаза электрического тока
1
Конфигурация контактов
SPDT
Тип монтажа
DIN-рейка
Минимальный считываемый ток
1A
Потребляемая мощность
1.4VA
Максимальный считываемый ток
10A
Токовая чувствительность
Undercurrent, Overcurrent
Тип клеммы
Винт
Задержка по времени
0.1 to 30 s
Минимальная рабочая температура
-20°C
Напряжение источника питания переменного тока
230, 24V ac
Ток контактов реле
8A
Максимальная рабочая температура
60°C
Материал каски/сварочной маски
89мм
Длина
66.5мм
Стандарты/одобрения
cUL, EN 61000-6-4, IEC 60664, RoHS
Ширина
17.5мм
Серия
RS PRO
Страна происхождения
United Kingdom
Информация о товаре
Designed for current monitoring, this true RMS (Route Mean Square) multi timer can measure both pure and distorted AC waves. This makes it suitable for environments where currents occur in short pulses, like variable speed motor drives and computers.
It has selectable overcurrent or undercurrent monitoring modes and an adjustable trip level and time delay. The single pole double throw (SPDT) relay is microprocessor-based and boasts high levels of efficiency and speed. Its supply, alarm and relay status are easily viewable with three different coloured LEDs (light-emitting diodes). This component has a 17.5 mm DIN (Deutsches Institut für Normung, or the German Institute for Standardisation) rail housing.
The device is suitable for surfacing mounting using the two clips provided on the rear of the unit. Its flame retardant casing carries UL (Underwriters Laboratories) approval. You'll find the relay conforms to European health, safety and environmental protection legislation for electrical components.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.