Техническая документация
Характеристики
Brand
RS ProТип продукции
Тестер электростатического разряда
Источник питания
Батарея
Контрольная точка
Поверхность
Напряжение питания
9 V
Глубина
241mm
Материал каски/сварочной маски
89мм
Тип дисплея
Аналоговый
Стандарты/одобрения
EN
Ширина
305мм
Страна происхождения
United States
Информация о товаре
Used to measure point-to-point (Rp-p) and surface to ground (Rg) resistance, this analogue surface resistance test kit from RS PRO is designed for Electrostatic Discharge Protected Areas (EPAs). EPAs protect sensitive electronic components and circuitry from electrostatic discharge and are commonly mandated in all kinds of electrical settings, from simple repair benches to entire factories.
Equipped with an automatic test voltage selector, the test voltage will switch from 10 V to 100 V if the measured resistance exceeds 10 ohms. Weighing just 200 grams, the tester is powered by a 9 V alkaline battery for portability. An LED indicator illuminates when the battery power is low.
This test kit is Ideal for use in automatic test range voltage selection compliance verification as required by EN 61340-5-1, which is the accepted ESD (Electrostatic Discharge) protection standard for IEC (International Electrotechnical Commission) member countries.
RS PRO is our own brand range and brings you a wide range of high-quality, great Value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Информация о наличии не успела загрузиться
тг 258 218,49
тг 258 218,49 Each (ex VAT)
1
тг 258 218,49
тг 258 218,49 Each (ex VAT)
Информация о наличии не успела загрузиться
1
| Количество | Цена единицы |
|---|---|
| 1 - 4 | тг 258 218,49 |
| 5 - 9 | тг 245 698,02 |
| 10 - 39 | тг 238 179,48 |
| 40+ | тг 220 643,67 |
Техническая документация
Характеристики
Brand
RS ProТип продукции
Тестер электростатического разряда
Источник питания
Батарея
Контрольная точка
Поверхность
Напряжение питания
9 V
Глубина
241mm
Материал каски/сварочной маски
89мм
Тип дисплея
Аналоговый
Стандарты/одобрения
EN
Ширина
305мм
Страна происхождения
United States
Информация о товаре
Used to measure point-to-point (Rp-p) and surface to ground (Rg) resistance, this analogue surface resistance test kit from RS PRO is designed for Electrostatic Discharge Protected Areas (EPAs). EPAs protect sensitive electronic components and circuitry from electrostatic discharge and are commonly mandated in all kinds of electrical settings, from simple repair benches to entire factories.
Equipped with an automatic test voltage selector, the test voltage will switch from 10 V to 100 V if the measured resistance exceeds 10 ohms. Weighing just 200 grams, the tester is powered by a 9 V alkaline battery for portability. An LED indicator illuminates when the battery power is low.
This test kit is Ideal for use in automatic test range voltage selection compliance verification as required by EN 61340-5-1, which is the accepted ESD (Electrostatic Discharge) protection standard for IEC (International Electrotechnical Commission) member countries.
RS PRO is our own brand range and brings you a wide range of high-quality, great Value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
