RS PRO Контроллер для технологического насоса
Техническая документация
Характеристики
Brand
RS ProCompatible Pump Type
Brushless Micropump
Тип продукции
Process Pump Controller
Напряжение питания
28, 6V
Степень защиты
IP20
Максимальная температура жидкости
80°C
Maximum Output Pressure
10bar
Стандарты/одобрения
CMRT, TCS Declaration of Conformity - RoHS Directive 2011/65/EU, SVCH, 3TG and REACH compliant, ISO 9001 Quality Control Standard
Страна происхождения
United Kingdom
Информация о товаре
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.
Информация о наличии не успела загрузиться
P.O.A.
1
P.O.A.
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
RS ProCompatible Pump Type
Brushless Micropump
Тип продукции
Process Pump Controller
Напряжение питания
28, 6V
Степень защиты
IP20
Максимальная температура жидкости
80°C
Maximum Output Pressure
10bar
Стандарты/одобрения
CMRT, TCS Declaration of Conformity - RoHS Directive 2011/65/EU, SVCH, 3TG and REACH compliant, ISO 9001 Quality Control Standard
Страна происхождения
United Kingdom
Информация о товаре
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.