RS PRO Цифровой мультиметр

RS PRO IDM103N Digital Multimeter

RS PRO IDM103N digital multimeters are handheld devices which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.
This digital multimeter offers high specification performance with 4000 Count display and 42 segment bar graph.
RS PRO range of handheld and bench digital multimeters are RS approved meaning that they are great value for money and high quality you can rely on.

Features and Benefits

• 10 A (continuous) current range
• Data hold/relative modes
• 1 MHz counter with full 9999 Count display
• Diode test and continuity sounder
• 4 nF to 40 μF capacitance ranges
• Mains proof resistance ranges
• Full autoranging with manual override
• Auto power shutdown
• Digital display update rate 2 per second
• Bargraph display update rate 20 per second
• Fused 400 mA and 10A ranges
• Dust and water protected to IP64
• Water resistant via O-Ring sealed case
• Dual high energy fuse protection

What does it measure?

• DC and AC voltages - up to 1000 V
• DC and AC current - up 10A with 10 mA resolution
• Resistance and continuity checking - up to 40 MΩ
• Capacitance - up to 40 mF
• Frequency - up to 400 MHz

Extra Protection

The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.

Display

The LED-backlit display turns ON/OFF at the touch of a button and automatically turns off to save battery life.

RS-232 Optical Interface

The IDM103N has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.

Batteries

Batteries can be easily replaced by unscrewing two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.

What does it include?

• Pair of Test Leads
• Test Clips
• User Manual
• Protective Holster

• Typical Applications:
• A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
• Electrical and electronic industries
• Safety guidelines
• When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.
• What is the difference between an analogue and a digital multimeter?
• The main difference is the display. A digital multimeter will show the results as numbers on a screen (usually a LED or LCD screen) whereas the analogue version has a needle to show the value.

Warning

When using test leads or probes, keep your fingers behind the finger guards. Remove test lead from the meter before opening the battery door or meter case.