RS PRO Шаговый двигатель
Техническая документация
Характеристики
Brand
RS ProТип продукции
Stepper Motor
Step Angle
1.8°
Holding Torque
0.36 Nm
Напряжение
2.8 V
Frame Size
42.3 x 42.3 mm
Диаметр вала
5мм
Номинальный ток
1.68 A
Winding Arrangement
Bipolar, Unipolar
Степень защиты
IP54, IP65
Длина вала
22mm
Number of Pole Pairs
1
Стандарты/одобрения
CE, RoHS Compliant
Глубина
62mm
Resistance Per Phase
1.65Ω
Диапазон регулировки выходного напряжения
186rpm
Detent Torque
25mNm
Страна происхождения
China
Информация о товаре
High Torque Hybrid Stepper Motor
High Torque Hybrid Stepper Motors are motion systems allowing to have a high positioning precision.
With their high power already at low speed, their stall torque and the possibility to divide the steps in micro steps, stepper motors can provide direct and precise motions in a small volume.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Информация о наличии не успела загрузиться
тг 10 169,25
тг 10 169,25 Each (ex VAT)
1
тг 10 169,25
тг 10 169,25 Each (ex VAT)
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
RS ProТип продукции
Stepper Motor
Step Angle
1.8°
Holding Torque
0.36 Nm
Напряжение
2.8 V
Frame Size
42.3 x 42.3 mm
Диаметр вала
5мм
Номинальный ток
1.68 A
Winding Arrangement
Bipolar, Unipolar
Степень защиты
IP54, IP65
Длина вала
22mm
Number of Pole Pairs
1
Стандарты/одобрения
CE, RoHS Compliant
Глубина
62mm
Resistance Per Phase
1.65Ω
Диапазон регулировки выходного напряжения
186rpm
Detent Torque
25mNm
Страна происхождения
China
Информация о товаре
High Torque Hybrid Stepper Motor
High Torque Hybrid Stepper Motors are motion systems allowing to have a high positioning precision.
With their high power already at low speed, their stall torque and the possibility to divide the steps in micro steps, stepper motors can provide direct and precise motions in a small volume.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: