RS PRO Шаговый двигатель
Техническая документация
Характеристики
Brand
RS ProТип продукции
Stepper Motor
Угол шага
1.8°
Удерживающий момент
0.44 Nm
Напряжение
2.8 V
Размер кадра
42.3 x 42.3 mm
Диаметр вала
5мм
Номинальный ток
1.68 A
Winding Arrangement
Bipolar, Unipolar
Длина вала
22mm
Степень защиты
IP65, IP54
Количество полюсных пар
1
Ширина
42.3 mm
Глубина
47мм
Сопротивление на одной фазе
1.65Ω
Стандарты/одобрения
RoHS Compliant
Диапазон регулировки выходного напряжения
186rpm
Упорный момент
25mNm
Информация о товаре
High Torque Hybrid Stepper Motor
High Torque Hybrid Stepper Motors are motion systems allowing to have a high positioning precision.
With their high power already at low speed, their stall torque and the possibility to divide the steps in micro steps, stepper motors can provide direct and precise motions in a small volume.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Информация о наличии не успела загрузиться
тг 24 298,92
тг 24 298,92 Each (ex VAT)
1
тг 24 298,92
тг 24 298,92 Each (ex VAT)
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
RS ProТип продукции
Stepper Motor
Угол шага
1.8°
Удерживающий момент
0.44 Nm
Напряжение
2.8 V
Размер кадра
42.3 x 42.3 mm
Диаметр вала
5мм
Номинальный ток
1.68 A
Winding Arrangement
Bipolar, Unipolar
Длина вала
22mm
Степень защиты
IP65, IP54
Количество полюсных пар
1
Ширина
42.3 mm
Глубина
47мм
Сопротивление на одной фазе
1.65Ω
Стандарты/одобрения
RoHS Compliant
Диапазон регулировки выходного напряжения
186rpm
Упорный момент
25mNm
Информация о товаре
High Torque Hybrid Stepper Motor
High Torque Hybrid Stepper Motors are motion systems allowing to have a high positioning precision.
With their high power already at low speed, their stall torque and the possibility to divide the steps in micro steps, stepper motors can provide direct and precise motions in a small volume.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: