Loop-powered Isolator 6185D
Техническая документация
Характеристики
Brand
PR ElectronicsТип продукции
Loop Powered Isolator
Тип входного сигнала
Current
Допуск на выходе
Ток
Сертификация опасной зоны
UL, ATEX, EAC, DNV GL, IECEx, EU RO marine, FM, Zone 2, Zone
Тип монтажа
Rail
Тип клеммы
Винт
Максимальная рабочая температура
60°C
Минимальная рабочая температура
-20°C
Степень защиты
IP20
Стандарты/одобрения
EAC, IECEX, NE 43, NE 21, Zone 2, DNV-GL / EU-RO marine, Zone 2-DIV 2, ATEX, UL 61010 / 508, FM
Серия
6185
Количество каналов
4
Страна происхождения
Denmark
Информация о товаре
PR Electronics 6185 Loop-powered Isolator
PR Electronics 6185 series are loop powered isolators provide galvanic separation of analogue current signals. Designed to give a simple and efficient solution in applications with unproblematic transmission of current signals according to NAMUR. The 6185 isolator is powered by the measured signal and loads the loop with a maximum 1.8 Vdc. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 168 channels can be mounted per meter.
PR Electronics DIN Rail Mounting
Информация о наличии не успела загрузиться
тг 125 186,82
тг 125 186,82 Each (ex VAT)
1
тг 125 186,82
тг 125 186,82 Each (ex VAT)
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
PR ElectronicsТип продукции
Loop Powered Isolator
Тип входного сигнала
Current
Допуск на выходе
Ток
Сертификация опасной зоны
UL, ATEX, EAC, DNV GL, IECEx, EU RO marine, FM, Zone 2, Zone
Тип монтажа
Rail
Тип клеммы
Винт
Максимальная рабочая температура
60°C
Минимальная рабочая температура
-20°C
Степень защиты
IP20
Стандарты/одобрения
EAC, IECEX, NE 43, NE 21, Zone 2, DNV-GL / EU-RO marine, Zone 2-DIV 2, ATEX, UL 61010 / 508, FM
Серия
6185
Количество каналов
4
Страна происхождения
Denmark
Информация о товаре
PR Electronics 6185 Loop-powered Isolator
PR Electronics 6185 series are loop powered isolators provide galvanic separation of analogue current signals. Designed to give a simple and efficient solution in applications with unproblematic transmission of current signals according to NAMUR. The 6185 isolator is powered by the measured signal and loads the loop with a maximum 1.8 Vdc. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 168 channels can be mounted per meter.