PR Electronics 1 Channel Galvanic Barrier, ATEX
Техническая документация
Характеристики
Brand
PR ElectronicsКоличество каналов
1
Тип продукции
Galvanic Barrier
Barrier Type
Galvanic Barrier
Тип монтажа
DIN-рейка
Сертификация опасной зоны
ATEX
Тип клеммы
Винт
Степень защиты
IP20
Напряжение питания
19.2 to 300 V dc, 21.6 to 253 V ac
Maximum Safety Current
400mA
Минимальная рабочая температура
-20°C
Maximum Safety Voltage
250V ac
Максимальная рабочая температура
60°C
Стандарты/одобрения
NE 21, NE 43, IEC 61508
Серия
5100
Страна происхождения
Denmark
Информация о товаре
PR Electronics 5104B Ex Repeater / Power Supply
PR Electronics 5104B intrinsically safe repeater is a power supply and safety barrier for 2-wire transmitters mounted in a hazardous area. The 5104B signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.
PR Electronics - Ex Interfaces
Информация о наличии не успела загрузиться
тг 105 889,83
тг 105 889,83 Each (ex VAT)
1
тг 105 889,83
тг 105 889,83 Each (ex VAT)
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
PR ElectronicsКоличество каналов
1
Тип продукции
Galvanic Barrier
Barrier Type
Galvanic Barrier
Тип монтажа
DIN-рейка
Сертификация опасной зоны
ATEX
Тип клеммы
Винт
Степень защиты
IP20
Напряжение питания
19.2 to 300 V dc, 21.6 to 253 V ac
Maximum Safety Current
400mA
Минимальная рабочая температура
-20°C
Maximum Safety Voltage
250V ac
Максимальная рабочая температура
60°C
Стандарты/одобрения
NE 21, NE 43, IEC 61508
Серия
5100
Страна происхождения
Denmark
Информация о товаре
PR Electronics 5104B Ex Repeater / Power Supply
PR Electronics 5104B intrinsically safe repeater is a power supply and safety barrier for 2-wire transmitters mounted in a hazardous area. The 5104B signal conditioner is based on microprocessor technology for gain and offset. The analogue signal is transmitted at a response time of less than 25 ms. 20 factory-calibrated measurement ranges in the 5104A can be selected by the internal DIP-switches without the need for recalibration. Mounted vertically or horizontally on a DIN rail. As the devices can be mounted without distance between neighbouring units, up to 84 channels can be mounted per meter.
PR Electronics - Ex Interfaces