Техническая документация
Характеристики
Brand
MurataТип продукции
Модуль LoRa
Максимальная выходная мощность
10dBm
Чувствительность приемника
-135dBm
Тип протокола
LoRaWAN
Поддерживаемые интерфейсы шины
SPI, UART, GPIO, ADC, I2C
Минимальное напряжение питания
2.2V
Максимальная поддерживаемая емкость памяти
3.6V
Стандарты/одобрения
RoHS
Страна происхождения
China
Информация о товаре
The Murata new, compact, low cost, low power wide area network (LPWAN) wireless module that supports the LoRaWAN long range wireless protocol. This new stand-alone module measures just 12.5 x 11.6 x 1.76 mm, is constructed in a metal shielded package and comprises a Semtech SX1276 ultra long range spread spectrum wireless transceiver and an STMicro STM32L0 series ARM Cortex-M0+ 32 bit microcontroller (MCU). The normal output power is +14 dBm but a PA boost function can be selected to increase RF output to +20 dBm for long range applications or those where the end-device is sited in a poor signal location indoors. The MCU includes 192 kB flash and 20 kB RAM, and has enough memory to embed customer applications and host other modulation stacks.
Информация о наличии не успела загрузиться
P.O.A.
1
P.O.A.
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
MurataТип продукции
Модуль LoRa
Максимальная выходная мощность
10dBm
Чувствительность приемника
-135dBm
Тип протокола
LoRaWAN
Поддерживаемые интерфейсы шины
SPI, UART, GPIO, ADC, I2C
Минимальное напряжение питания
2.2V
Максимальная поддерживаемая емкость памяти
3.6V
Стандарты/одобрения
RoHS
Страна происхождения
China
Информация о товаре
The Murata new, compact, low cost, low power wide area network (LPWAN) wireless module that supports the LoRaWAN long range wireless protocol. This new stand-alone module measures just 12.5 x 11.6 x 1.76 mm, is constructed in a metal shielded package and comprises a Semtech SX1276 ultra long range spread spectrum wireless transceiver and an STMicro STM32L0 series ARM Cortex-M0+ 32 bit microcontroller (MCU). The normal output power is +14 dBm but a PA boost function can be selected to increase RF output to +20 dBm for long range applications or those where the end-device is sited in a poor signal location indoors. The MCU includes 192 kB flash and 20 kB RAM, and has enough memory to embed customer applications and host other modulation stacks.