Martindale RSTEK300 Многофункциональный калибратор

Martindale Direct Current Calibrator

The Martindale direct current calibrator is able to sink or source a current up to 20mA. It is intended for process control instrumentation and general purpose signal
injection applications. It has a monitor mode facility incorporated into the design, whereby the current (0mA to 20mA) in the process loop can be monitored and read directly from the digital display. This device is also fully protected against inadvertent misuse. This low-cost unit offers exceptional Value for money means of delivering and measuring current ranging between 0mA and 20mA currents. This makes it Ideal for cost-effective application in testing, calibrating and troubleshooting in a wide range of process control environments.

Features and Benefits

• Sink, source and monitor modes ranging between 0mA and 20mA F. S. (+0.1%)
• DC/DC converter output of 28.5V (+0.1V)
• Resolution of 10μA
• Overload protection for additional safety
• ABS case with clear three digit LCD display
• Temperature drift 150ppm°C
• Linearity of 0.15%
• Output noise (typically) of 4mV p/p
• Battery condition and error indication LEDs
• Requires two PP3 alkaline batteries
• Capable of withstanding DC voltages up to 50V but can be damaged by AC input
• Operating temperature ranges between 0°C and 50°C

Applications

• Process control automation
• Manufacturing
• Instrumentation

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007