Техническая документация
Характеристики
Тип продукции
Привод микропереключателя
Для использования с
Серия SX
Стандарты/одобрения
RoHS, BS EN 61340-5-1:2007, ANSI/ESD S20.20:2014
Длина исполнительного механизма
6.1мм
Материал валка
Бронза
Материал исполнительного механизма
Стальной
Тип исполнительного механизма
Роликовый рычаг
Страна происхождения
Mexico
Информация о товаре
This microswitch actuator is a roller-leaf style device designed to Interface with SX Series microswitches in industrial control and sensing environments. It converts mechanical motion into switch actuation using a bronze roller on a stainless-steel leaf, providing a tactile rolling contact for repeatable switching in automation and electrical assemblies.
The stainless-steel leaf provides structural resilience while the bronze roller minimises surface wear and friction during repeated rolling contact.
It is designed to comply with recognised ESD practices, aligning with ANSI S20.20 to reduce static-related damage during installation and maintenance.
Yes, it conforms to RoHS requirements, limiting the use of specified hazardous materials in its construction.
Ensure mechanical alignment with the switch plunger, confirm roller orientation for smooth engagement, and verify compatibility with the target switch mounting to maintain actuator performance.
Информация о наличии не успела загрузиться
тг 3 026,19
тг 3 026,19 Each (ex VAT)
1
тг 3 026,19
тг 3 026,19 Each (ex VAT)
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Тип продукции
Привод микропереключателя
Для использования с
Серия SX
Стандарты/одобрения
RoHS, BS EN 61340-5-1:2007, ANSI/ESD S20.20:2014
Длина исполнительного механизма
6.1мм
Материал валка
Бронза
Материал исполнительного механизма
Стальной
Тип исполнительного механизма
Роликовый рычаг
Страна происхождения
Mexico
Информация о товаре
This microswitch actuator is a roller-leaf style device designed to Interface with SX Series microswitches in industrial control and sensing environments. It converts mechanical motion into switch actuation using a bronze roller on a stainless-steel leaf, providing a tactile rolling contact for repeatable switching in automation and electrical assemblies.
The stainless-steel leaf provides structural resilience while the bronze roller minimises surface wear and friction during repeated rolling contact.
It is designed to comply with recognised ESD practices, aligning with ANSI S20.20 to reduce static-related damage during installation and maintenance.
Yes, it conforms to RoHS requirements, limiting the use of specified hazardous materials in its construction.
Ensure mechanical alignment with the switch plunger, confirm roller orientation for smooth engagement, and verify compatibility with the target switch mounting to maintain actuator performance.