USB-TTL serial cable, input based output

FTDI Chip USB To UART Cable

The FTDI chip USB to UART cable is a fast and simple way to connect devices with a TTL level serial interface to USB. The TTL voltage levels for the UART signals are supplied with the application interface logic. Each cable contains a small internal electronic circuit board, utilising the FT232R, encapsulated into the USB connector at the end of the cable. The cable has a gauge of 24AWG and diameter of 5mm. They are un-terminated, bare and tinned wires. The circuit is powered from the USB using 5V power pins and any VCC connection, always at 5VDC. However, this cable is available with signal TTL logic level supplied according to customers interface. These cables are supported with Microsoft WHQL certified VCP drivers for Windows, Apple Mac, and Linux.

Features and Benefits

• Connect directly to a microcontroller UART or I/O pins
• Data transfer rate is up to 3Mbps
• Internal EEPROM with user writeable area
• Low USB bandwidth consumption
• Operating temperature ranges between -40°C and 85°C
• Provides a USB to TTL Serial interface with various logic levels
• Powered from USB connector
• Six core cable with length of 1.8m
• UHCI/OHCI/EHCI host controller compatible
• Unique serial number attached, used for security purposes while transferring files via cable
• USB 2.0 full speed compatible
• Various UART-end connector options available

Applications

• Communication
• Embedded system

Certifications

• CE
• FCC approved