S/Steel Digital Lock for Panic Hardware

A range of pushbutton mechanical locks allowing controlled access using a coded entry sequence.
The code lock is supplied with full size lever handles for use in high traffic areas.

SUITABILITY

• This digital lock is suitable for door thickness of 35 to 60 mm.
• Models 500, 510 and 520 require a valid entry code at all times
• Models 505, 515 and 525 come with a code-free entry option
• The 500 and 505 models consist of front plate, black plate and 2-part spindle (for use with existing installed mortice)
• The 510 and 515 models include a deadlocking tubular mortice latch
• The 520 and 525 models include a full specification anti-panic mortice lock and cylinder
• Most people will set a code in the range of 4 to 7 digits, and the total number of codes in this range is 1584. The lock is factory set with a randomly selected 5 digit code starting with the ’C’ button.

Important information

The code is not recorded by the factory and can be changed as often as required to any other 5 digit code.

Maintenance

There is no need to conserve the working parts and no oil should be used.
To maintain the finish the lock should be cleaned regularly with a soft cloth. A silicone spray or similar item should be used to provide a protective film against grit and grime.

Digital Lock For Panic Hardware

• Keypad plate only, supplied with an extra long spindle to work with most single-point panic latches with 8mm spindle followers
• PVD stainless steel effect finish
• Weather resistant
• Requires a valid entry code at all times

Supplied with

full installation instructions