Техническая документация
Характеристики
Brand
Allegro MicrosystemsТип продукции
Датчик на основе эффекта Холла
Тип выхода датчика
Датчики с эффектом Холла
Технология
Стабилизированный прерыванием на прецизионном эффекте Холла
Тип монтажа
Сквозное отверстие
Магнитный тип
Однополюсный
Верхняя частота АЧХ
800kHz
Минимальное напряжение питания
3V
Корпус
SIP
Максимальная поддерживаемая емкость памяти
24V
Минимальная рабочая температура
-40°C
Число контактов
3
Максимальная рабочая температура
150°C
Ширина
1.52 mm
Серия
A1120
Материал каски/сварочной маски
3.02мм
Длина
4.09мм
Стандарты/одобрения
100% matte tin plated, Pb-Free
Ток питания
4mA
Время отклика
25μs
Автомобильный стандарт
AEC-Q100
Информация о товаре
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Hall Effect Sensors, Allegro MicroSystems
Информация о наличии не успела загрузиться
тг 4 425,30
тг 885,06 Each (In a Pack of 5) (ex VAT)
Стандартная упаковка
5
тг 4 425,30
тг 885,06 Each (In a Pack of 5) (ex VAT)
Информация о наличии не успела загрузиться
Стандартная упаковка
5
| Количество | Цена единицы | Per Упаковка |
|---|---|---|
| 5 - 20 | тг 885,06 | тг 4 425,30 |
| 25 - 95 | тг 522,99 | тг 2 614,95 |
| 100 - 245 | тг 411,24 | тг 2 056,20 |
| 250 - 495 | тг 348,66 | тг 1 743,30 |
| 500+ | тг 308,43 | тг 1 542,15 |
Техническая документация
Характеристики
Brand
Allegro MicrosystemsТип продукции
Датчик на основе эффекта Холла
Тип выхода датчика
Датчики с эффектом Холла
Технология
Стабилизированный прерыванием на прецизионном эффекте Холла
Тип монтажа
Сквозное отверстие
Магнитный тип
Однополюсный
Верхняя частота АЧХ
800kHz
Минимальное напряжение питания
3V
Корпус
SIP
Максимальная поддерживаемая емкость памяти
24V
Минимальная рабочая температура
-40°C
Число контактов
3
Максимальная рабочая температура
150°C
Ширина
1.52 mm
Серия
A1120
Материал каски/сварочной маски
3.02мм
Длина
4.09мм
Стандарты/одобрения
100% matte tin plated, Pb-Free
Ток питания
4mA
Время отклика
25μs
Автомобильный стандарт
AEC-Q100
Информация о товаре
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
