Техническая документация
Характеристики
Brand
STMicroelectronicsТип продукции
МОП-транзистор
Диапазон выходных частот
0.6A
Число контактов
16
Корпус
SO-16
Тип драйвера
МОП-транзистор
Минимальное напряжение питания
16V
Количество драйверов
1
Максимальная поддерживаемая емкость памяти
16V
Минимальная рабочая температура
-40°C
Максимальная рабочая температура
125°C
Длина
20мм
Материал каски/сварочной маски
4.59мм
Стандарты/одобрения
Нет
Тип монтажа
Поверхность
Автомобильный стандарт
Нет
Информация о товаре
The TD310 is designed to drive one, two or three Power IGBT/MOS and has driving capability for pulse transformer. So it is perfectly suited to interface control IC with Power Switches in low side or half-bridge configuration. TD310 includes a current sense comparator which inhibit the output drivers in case of overcurrent. An alarm output signals the even to a controller. TD310 also includes an uncommitted op-amp which can be used for current measurement (as an amplifier before the A/D input of a microcontroller) of for other general purpose. Programmable undervoltage lockout and standby mode make TD310 suitable for a large area of environment and application. Typical applications are low side IGBT and power MOSFET drive in three phase systems, pulse transformer drive, and general purpose pulse drive.
Информация о наличии не успела загрузиться
P.O.A.
1
P.O.A.
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
STMicroelectronicsТип продукции
МОП-транзистор
Диапазон выходных частот
0.6A
Число контактов
16
Корпус
SO-16
Тип драйвера
МОП-транзистор
Минимальное напряжение питания
16V
Количество драйверов
1
Максимальная поддерживаемая емкость памяти
16V
Минимальная рабочая температура
-40°C
Максимальная рабочая температура
125°C
Длина
20мм
Материал каски/сварочной маски
4.59мм
Стандарты/одобрения
Нет
Тип монтажа
Поверхность
Автомобильный стандарт
Нет
Информация о товаре
The TD310 is designed to drive one, two or three Power IGBT/MOS and has driving capability for pulse transformer. So it is perfectly suited to interface control IC with Power Switches in low side or half-bridge configuration. TD310 includes a current sense comparator which inhibit the output drivers in case of overcurrent. An alarm output signals the even to a controller. TD310 also includes an uncommitted op-amp which can be used for current measurement (as an amplifier before the A/D input of a microcontroller) of for other general purpose. Programmable undervoltage lockout and standby mode make TD310 suitable for a large area of environment and application. Typical applications are low side IGBT and power MOSFET drive in three phase systems, pulse transformer drive, and general purpose pulse drive.