TE Connectivity Black No 3:1, Heat Shrink Tubing 9.5mm Sleeve Dia. x 300mm Length , SCL Series

Код товара RS: 397-837Бренд: TE ConnectivityПарт-номер производителя: SCL-3/8-0
brand-logo

Техническая документация

Характеристики

Диаметр рукава

9.5мм

Цвет

Черный

Диаметр после сжатия

3.4мм

Тип рукава

Термоусадка

С клеевой подкладкой

Нет

Коэффициент усадки

3:1

Длина рукава

300мм

Материал

Полиолефин

Диапазон рабочих температур

-55 → +110 °C

Огнезащитный

Нет

Не содержит галоген

Нет

Серия

SCL

Страна происхождения

Czech Republic

Информация о товаре

Raychem SCL™

SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.

Standards

AMS-DTL 23053/ 4 class 1.

Информация о наличии не успела загрузиться

Пожалуйста, перезагрузите страницу (ctrl+F5)

Информация о наличии не успела загрузиться

тг 804,60

Each (In a Pack of 5) (ex VAT)

TE Connectivity Black No 3:1, Heat Shrink Tubing 9.5mm Sleeve Dia. x 300mm Length , SCL Series

тг 804,60

Each (In a Pack of 5) (ex VAT)

TE Connectivity Black No 3:1, Heat Shrink Tubing 9.5mm Sleeve Dia. x 300mm Length , SCL Series
Информация о наличии не успела загрузиться

Купить большой партией

КоличествоЦена единицыPer Упаковка
5 - 70тг 804,60тг 4 023,00
75 - 245тг 764,37тг 3 821,85
250+тг 724,14тг 3 620,70

Техническая документация

Характеристики

Диаметр рукава

9.5мм

Цвет

Черный

Диаметр после сжатия

3.4мм

Тип рукава

Термоусадка

С клеевой подкладкой

Нет

Коэффициент усадки

3:1

Длина рукава

300мм

Материал

Полиолефин

Диапазон рабочих температур

-55 → +110 °C

Огнезащитный

Нет

Не содержит галоген

Нет

Серия

SCL

Страна происхождения

Czech Republic

Информация о товаре

Raychem SCL™

SCL tubing is a semi-rigid heat shrinkable tubing with a meltable inner wall, designed to provide one-step moisture proof encapsulation of a wide variety of electrical parts including wire splices, breakouts, and electronic components. Manufactured from radiation cross linked polyolefins, the outer wall shrinks when heated to above 135°C, while the inner wall (which melts at 100°C) flows into the crevices and interstices by the shrinking action of the outer tubing. When cooled the entire mass becomes a rigid, tough, homogenous covering with a controlled wall thickness. SCL® shrinks to between 17% and 40% of its supplied diameter according to size, and therefore few sizes are required to cover a range of irregular shapes with widely varying dimensions. Unaffected by most solvents and chemicals and non-corrosive in contact with electrical joints, SCL also has high dielectric strength (240-410 kV/cm dependent on wall thickness). Colour: Black.,Sizes quoted are as supplied.

Standards

AMS-DTL 23053/ 4 class 1.