Техническая документация
Характеристики
Brand
TE ConnectivityТип
Колпачок прямоугольный для кабеля
Inside Diameter Primary
43mm
Внутренний диаметр (главный)
43мм
Inside Diameter Secondary
43mm
Внутренний диаметр (второстепенный)
43мм
С клеевой подкладкой
Нет
Материал
Стойкий к воде эластомер
Количество пробоев
1
Shrunk Diameter Primary
28.2mm
Диаметр после сжатия (первичный)
28.2мм
Shrunk Diameter Secondary
9.9mm
Диаметр после сжатия (вторичный)
9.9мм
Серия
222K1
Страна происхождения
Czech Republic
Информация о товаре
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
тг 8 005,77
Each (ex VAT)
1
тг 8 005,77
Each (ex VAT)
1
Купить большой партией
Количество | Цена единицы |
---|---|
1 - 14 | тг 8 005,77 |
15 - 49 | тг 7 634,76 |
50+ | тг 7 254,81 |
Техническая документация
Характеристики
Brand
TE ConnectivityТип
Колпачок прямоугольный для кабеля
Inside Diameter Primary
43mm
Внутренний диаметр (главный)
43мм
Inside Diameter Secondary
43mm
Внутренний диаметр (второстепенный)
43мм
С клеевой подкладкой
Нет
Материал
Стойкий к воде эластомер
Количество пробоев
1
Shrunk Diameter Primary
28.2mm
Диаметр после сжатия (первичный)
28.2мм
Shrunk Diameter Secondary
9.9mm
Диаметр после сжатия (вторичный)
9.9мм
Серия
222K1
Страна происхождения
Czech Republic
Информация о товаре
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.