Техническая документация
Характеристики
Brand
SiemensТип принадлежностей
Модуль избирательности
Для использования с
SITOP
Диапазон входного тока
0.5 → 3A
Соблюдаемые стандарты
CE, cULus
Напряжение питания
24В пост. тока
Выходное напряжение переменного или постоянного тока
постоянный ток
Выходной ток
3A
Входное напряжение переменного или постоянного тока
постоянный ток
Входное напряжение
22 → 30В пост. тока
Страна происхождения
Austria
Информация о товаре
SITOP PSE200U Selectivity Module
The SITOP PSE200U selectivity module is the optimal addition to all 24 V power supplies for distributing and monitoring the load current across several branch circuits. Overload and short-circuit in one or more feeders are reliably detected.
The electronics tolerate short-term current peaks, e.g. due to high inrush current, and de-energize feeders with longer overload. This is ensured even on high-resistance cables and for short-circuits that develop slowly over time.
The intact feeders continue to be supplied with 24 V without any interruption or disturbance, thereby minimizing plant downtimes. The faulty feeder is signalled using LEDs and a group signal contact. Regardless of the industry or requirements, Siemens offers reliable and efficient power supplies for every plant.
Approvals
CE, cULus, UR, CB, ATEX, IEXEx, cCSAus Class I Div 2, GL, ABS
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
SiemensТип принадлежностей
Модуль избирательности
Для использования с
SITOP
Диапазон входного тока
0.5 → 3A
Соблюдаемые стандарты
CE, cULus
Напряжение питания
24В пост. тока
Выходное напряжение переменного или постоянного тока
постоянный ток
Выходной ток
3A
Входное напряжение переменного или постоянного тока
постоянный ток
Входное напряжение
22 → 30В пост. тока
Страна происхождения
Austria
Информация о товаре
SITOP PSE200U Selectivity Module
The SITOP PSE200U selectivity module is the optimal addition to all 24 V power supplies for distributing and monitoring the load current across several branch circuits. Overload and short-circuit in one or more feeders are reliably detected.
The electronics tolerate short-term current peaks, e.g. due to high inrush current, and de-energize feeders with longer overload. This is ensured even on high-resistance cables and for short-circuits that develop slowly over time.
The intact feeders continue to be supplied with 24 V without any interruption or disturbance, thereby minimizing plant downtimes. The faulty feeder is signalled using LEDs and a group signal contact. Regardless of the industry or requirements, Siemens offers reliable and efficient power supplies for every plant.
Approvals
CE, cULus, UR, CB, ATEX, IEXEx, cCSAus Class I Div 2, GL, ABS