RS PRO Шаровой клапан потока
Техническая документация
Характеристики
Brand
RS ProТип
2х-сторонний
Материал шара
Латунь с покрытием из хрома
Тип крепления
С резьбой
Стандарт резьбы
BSP
Размер резьбы
1-1/2дюйм
Материал корпуса
Латунь с покрытием из никеля
Диаметр трубы
40mm
Рабочее давление
40бар
Страна происхождения
Italy
Информация о товаре
S.64LT Brass Ball Valve - 1/4 Turn, ISO 5211 Actuator Mounting Pad
More and more automation is required at all levels in our society and the S.64 range is the answer to all our needs for reliable actuated ball valves.
It features special seat design to automatically compensate for wear and it has successfully passed 100.000* cycle life tests.
Warning
Freezing of the fluid in the installation may severely damage the valve
Approvals
WRAS (UK)
GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
UkrSepro (Ukraine)
RoHS Compliant
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
тг 26 176,32
Each (ex VAT)
1
тг 26 176,32
Each (ex VAT)
1
Купить большой партией
| Количество | Цена единицы |
|---|---|
| 1 - 9 | тг 26 176,32 |
| 10 - 24 | тг 25 233,15 |
| 25 - 49 | тг 24 522,42 |
| 50+ | тг 23 816,16 |
Техническая документация
Характеристики
Brand
RS ProТип
2х-сторонний
Материал шара
Латунь с покрытием из хрома
Тип крепления
С резьбой
Стандарт резьбы
BSP
Размер резьбы
1-1/2дюйм
Материал корпуса
Латунь с покрытием из никеля
Диаметр трубы
40mm
Рабочее давление
40бар
Страна происхождения
Italy
Информация о товаре
S.64LT Brass Ball Valve - 1/4 Turn, ISO 5211 Actuator Mounting Pad
More and more automation is required at all levels in our society and the S.64 range is the answer to all our needs for reliable actuated ball valves.
It features special seat design to automatically compensate for wear and it has successfully passed 100.000* cycle life tests.
Warning
Freezing of the fluid in the installation may severely damage the valve
Approvals
WRAS (UK)
GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
UkrSepro (Ukraine)
RoHS Compliant
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.