Техническая документация
Информация о товаре
Resistive Touch LCD SPI Display Starter Kits, 4D Systems
The SK-FT843 range of starter kits from 4D Systems comprise of a 4DLCD-FT483 4.3 inch display module, a black (9048525) or white (9048528) display bezel, a breakout board and corner plates.
Using the display module you can connect to any SPI host. The display module also features an FT800 graphics controller with Embedded Video Engine (EVE) that provides your display with high-quality graphics , software support, libraries and demos.
Features & Benefits of the LCD SPI Display
480 x 272 pixel resolution
Up to 262k colours
Mono PWM audio output
PWM dimming control
Power mode control
Standard 10-way, 0.5 mm FPC ribbon
Programmable interrupt controller
64 voice polyphonic sound synthesizer
Dimensions: 105. mm x 67.2 mm x 4.2 mm
Viewing area: 95.04 mm x 55.5 mm
Touch area: 96.07 mm x 55.5 mm
Flex length: 57.51 mm
Suitable for a 3.3 V power supply
Bezel
The plastic bezel that is included in the kit comes supplied with brass mounting inserts, 4 spring clips and 8 M2 mounting screws and washers. As well as being a cover for your display, the fixings enable you to panel mount the display into an enclosure.
Breakout Board
The breakout board that is included acts as an interface between the SPI display and a host printed circuit board or breadboard.
4D Systems LCD Touchscreens
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Информация о товаре
Resistive Touch LCD SPI Display Starter Kits, 4D Systems
The SK-FT843 range of starter kits from 4D Systems comprise of a 4DLCD-FT483 4.3 inch display module, a black (9048525) or white (9048528) display bezel, a breakout board and corner plates.
Using the display module you can connect to any SPI host. The display module also features an FT800 graphics controller with Embedded Video Engine (EVE) that provides your display with high-quality graphics , software support, libraries and demos.
Features & Benefits of the LCD SPI Display
480 x 272 pixel resolution
Up to 262k colours
Mono PWM audio output
PWM dimming control
Power mode control
Standard 10-way, 0.5 mm FPC ribbon
Programmable interrupt controller
64 voice polyphonic sound synthesizer
Dimensions: 105. mm x 67.2 mm x 4.2 mm
Viewing area: 95.04 mm x 55.5 mm
Touch area: 96.07 mm x 55.5 mm
Flex length: 57.51 mm
Suitable for a 3.3 V power supply
Bezel
The plastic bezel that is included in the kit comes supplied with brass mounting inserts, 4 spring clips and 8 M2 mounting screws and washers. As well as being a cover for your display, the fixings enable you to panel mount the display into an enclosure.
Breakout Board
The breakout board that is included acts as an interface between the SPI display and a host printed circuit board or breadboard.