Техническая документация
Характеристики
Brand
IDEMНапряжение питания
24В пост. тока
Защитные контакты
2NC
Материал корпуса
316 Stainless Steel
Тип соединения
Кабель 2 м
Тип исполнительного механизма
Master Coded
Вспомогательные контакты
NC
Категория безопасности
4
принцип работы датчика
Магнитный
Комплект включает исполнительный механизм
Да
Расстояние переключения
10 (Close) mm, 15 (Open) mm
Серия
MSA
Степень защиты
IP67, IP69K
Ток питания
100mA
Количество направлений захода
2
Глубина
27мм
Ширина
38мм
Длина
95мм
Страна происхождения
United Kingdom
Информация о товаре
IDEM MSA Standalone Coded Non Contact Switches
The MSA Non-contact Coded Switches have been developed as standalone mountable devices to provide a high level of fault detection and functional safety.
These non-contact switches can be mounted to guard doors to provide and maintain a high level of functional safety without the need to connect to a safety relay or safety controller. They have their own internal monitoring system and use force guided mechanical contacts which maintain PLe/Category 4 (ISO13849-1) even when the switches are connected in series.
Made from stainless steel 316 with a mirror polished (Ra4) surface finish these safety switches are suitable for CIP and SIP process applications and have IP69K ingress protection.
The typical sensing distance of the switch when it is "on" is 12mm, with wide tolerance to guard misalignment after setting.
Standards
High Functional Safety to ISO13849-1 - up to PLe/Cat 4. Conformance to EN60947-5-3 PDF-M.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
тг 78 944,67
Each (ex VAT)
1
тг 78 944,67
Each (ex VAT)
1
Техническая документация
Характеристики
Brand
IDEMНапряжение питания
24В пост. тока
Защитные контакты
2NC
Материал корпуса
316 Stainless Steel
Тип соединения
Кабель 2 м
Тип исполнительного механизма
Master Coded
Вспомогательные контакты
NC
Категория безопасности
4
принцип работы датчика
Магнитный
Комплект включает исполнительный механизм
Да
Расстояние переключения
10 (Close) mm, 15 (Open) mm
Серия
MSA
Степень защиты
IP67, IP69K
Ток питания
100mA
Количество направлений захода
2
Глубина
27мм
Ширина
38мм
Длина
95мм
Страна происхождения
United Kingdom
Информация о товаре
IDEM MSA Standalone Coded Non Contact Switches
The MSA Non-contact Coded Switches have been developed as standalone mountable devices to provide a high level of fault detection and functional safety.
These non-contact switches can be mounted to guard doors to provide and maintain a high level of functional safety without the need to connect to a safety relay or safety controller. They have their own internal monitoring system and use force guided mechanical contacts which maintain PLe/Category 4 (ISO13849-1) even when the switches are connected in series.
Made from stainless steel 316 with a mirror polished (Ra4) surface finish these safety switches are suitable for CIP and SIP process applications and have IP69K ingress protection.
The typical sensing distance of the switch when it is "on" is 12mm, with wide tolerance to guard misalignment after setting.
Standards
High Functional Safety to ISO13849-1 - up to PLe/Cat 4. Conformance to EN60947-5-3 PDF-M.