C & K BTNK0390 Колпачок для кнопочного переключателя

Код товара RS: 787-4833Бренд: C & KПарт-номер производителя: BTN K03 90
brand-logo

Техническая документация

Характеристики

Цвет колпачка

Черный

Тип принадлежностей

Button

Brand

C & K

Для использования с

Уплотненный тактовый переключатель серии KSA и KSL

Страна происхождения

France

Информация о товаре

Electronic Converter for MR16

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.

Информация о наличии не успела загрузиться

Пожалуйста, перезагрузите страницу (ctrl+F5)

Информация о наличии не успела загрузиться

P.O.A.

C & K BTNK0390 Колпачок для кнопочного переключателя

P.O.A.

C & K BTNK0390 Колпачок для кнопочного переключателя
Информация о наличии не успела загрузиться

Купить большой партией

КоличествоЦена единицы
1 - 9P.O.A.
10 - 24P.O.A.
25 - 49P.O.A.
50 - 99P.O.A.
100+P.O.A.

Техническая документация

Характеристики

Цвет колпачка

Черный

Тип принадлежностей

Button

Brand

C & K

Для использования с

Уплотненный тактовый переключатель серии KSA и KSL

Страна происхождения

France

Информация о товаре

Electronic Converter for MR16

Low Voltage Lighting Transformers

Dimming Methods (where applicable):
Leading Edge:
The control device is either a thyristor or triac which blocks power until they are switched on by the control signal. At that point the current flows almost instantaneously and continues to flow until the end of the half cycle of the mains waveform. When the signal reaches zero, the device turns off and no more current is passed until it is triggered again. Turning the power on and off in this manner averages out creating a constant intensity level and by altering the precise trigger point over a period of time the lamp can be dimmed.

Trailing Edge:
Since this method of dimming uses transistor technology it is not limited to just switching, therefore current can be controlled gradually. Transistors can be programmed to pass current at the start of each half cycle, and gradually switch off later. This will control the full amount of power reaching the lamp without the side effects of a step increase in current.