ADAFRUIT INDUSTRIES 2478 Модуль дисплея
Техническая документация
Характеристики
Brand
ADAFRUIT INDUSTRIESРазмер дисплея по диагонали
2.4дюйм
Технология дисплея
Резистивный сенсорный экран
Классификация комплектов
Модуль дисплея
Наименование комплекта
TFT LCD Display
Для использования с
Разрабатываемые проекты
Технология
Дисплей TFT
Классификация
LCD Touchscreen
Страна происхождения
United States
Информация о товаре
Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.
Adafruit LCD Touchscreens
P.O.A.
1
P.O.A.
1
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
Техническая документация
Характеристики
Brand
ADAFRUIT INDUSTRIESРазмер дисплея по диагонали
2.4дюйм
Технология дисплея
Резистивный сенсорный экран
Классификация комплектов
Модуль дисплея
Наименование комплекта
TFT LCD Display
Для использования с
Разрабатываемые проекты
Технология
Дисплей TFT
Классификация
LCD Touchscreen
Страна происхождения
United States
Информация о товаре
Adafruit 2.4 inch TFT LCD Touchscreen Breakout Board with microSD Socket
This colour 2.4” TFT display has 4 bright white LED backlight and 240 x 320 pixels with individual RGB pixel control. It has a resistive touchscreen to detect finger presses anywhere on the screen. The built-in controller has RAM buffering to take the workload away from the microcontroller. This display board has two modes: 8-bit and SPI.
When using 8-bit mode, you need 8 digital data lines and 4 or 5 digital control lines to read and write to the display.
SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and dc) but is slower than 8-bit mode.
In addition, 4 pins are required for the touch screen (2 digital, 2 analogue).
If you are using SPI mode, you can also take advantage of the on-board micro-SD card socket.