Signal bar for auxiliary contact

Код товара RS: 914-4623Бренд: ABBПарт-номер производителя: 2CDE605200R0021 EPD-SB21
brand-logo

Техническая документация

Характеристики

Brand

ABB

Диапазон

EPD24

Серия

EPD-SB

Для использования с

EPD24-TB-101

Цвет

Серый

Страна происхождения

Germany

Информация о товаре

EPD24 Series Electronic Protection Device

ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.

Информация о наличии не успела загрузиться

Пожалуйста, перезагрузите страницу (ctrl+F5)

Информация о наличии не успела загрузиться

P.O.A.

Signal bar for auxiliary contact

P.O.A.

Signal bar for auxiliary contact
Информация о наличии не успела загрузиться

Техническая документация

Характеристики

Brand

ABB

Диапазон

EPD24

Серия

EPD-SB

Для использования с

EPD24-TB-101

Цвет

Серый

Страна происхождения

Germany

Информация о товаре

EPD24 Series Electronic Protection Device

ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.