Time Electronic 7007 Калибратор тока для контуров
Техническая документация
Характеристики
Brand
Time ElectronicsИзмерение абсолютного максимального тока
20mA
Наилучшая точность
±0,05 %
Тип батарей
9 В
Срок службы батарей
40 h
Источник питания
Батарея
Вес
200г
Высота
140мм
Длина
30мм
Максимальная рабочая температура
+50°C
Минимальная рабочая температура
0°C
Ширина
65мм
Model Number p
7007
Страна происхождения
United Kingdom
Информация о товаре
Time Electronics Loop-Mate 1 & 2 Current Loop Calibrator
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.
Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.
7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.
Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.
Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.
Supplied with
Carry case, leads and technical manual
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
Time ElectronicsИзмерение абсолютного максимального тока
20mA
Наилучшая точность
±0,05 %
Тип батарей
9 В
Срок службы батарей
40 h
Источник питания
Батарея
Вес
200г
Высота
140мм
Длина
30мм
Максимальная рабочая температура
+50°C
Минимальная рабочая температура
0°C
Ширина
65мм
Model Number p
7007
Страна происхождения
United Kingdom
Информация о товаре
Time Electronics Loop-Mate 1 & 2 Current Loop Calibrator
Loop-mates designed for the calibration, testing and measurement of process loops are pocket sized units that boast a simplistic operation, no complicated selections just grab and go.
Loop-Mate 1 (537-2580) - Simulator which acts as a source in providing loop signals, a simple up and down button allows the user to increase or decrease the signal.
7 set points: 10%, 25%, 50%, 75%, 90% and 100% each of which is shown on LED's with beeps. The Loop-Mate 1 when used in conjunction with Loop-Mate 2 allows users to check a signal has arrived within specification at another location.
Loop-Mate 2 (537-2603) - Signal indicator with a 4-20 mA or 0-10 V loop type selection, also allowing the user to choose between a display of direct units or % of span. Also, specifically designed so that the LCD display shows the signal in mA, V, or % of span within an accuracy of 0.05%.
Powered by a PP3 battery both units provide up to 40 hours of continuous use, making them the ideal addition to any engineer testing kit.
Supplied with
Carry case, leads and technical manual