Texas Instruments LM2903AVQPWR Компаратор
Техническая документация
Характеристики
Brand
Texas InstrumentsТип компаратора
Дифференциальный
Тип монтажа
Поверхностный монтаж
Тип корпуса
TSSOP
Тип источника питания
Двойной, одиночный
Тип выхода
Открытый коллектор
Количество каналов на ИС
2
Типичное время реагирования
1.3мкс
Число контактов
8
Типичное одиночное напряжение питания
3 → 28 В
Размеры
3 x 4.4 x 1.15мм
Длина
3мм
Ширина
4.4мм
Высота
1.15мм
Типичное двойное напряжение питания
±12 V, ±15 V, ±3 V, ±5 V, ±9 V
Типичное усиление по напряжению
100 дБ
Минимальная рабочая температура
-40 °C
Максимальная рабочая температура
+125 °C
Страна происхождения
Malaysia
Информация о товаре
LMx93/LM2903 family Dual Comparators
The Texas Instruments LM193, LM293, LM393 and LM2903 are dual differential input voltage comparators designed to operate from a single power supply over a wide range of voltages. The common mode input voltage range includes ground and the devices have open collector outputs.
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
2000
P.O.A.
2000
Техническая документация
Характеристики
Brand
Texas InstrumentsТип компаратора
Дифференциальный
Тип монтажа
Поверхностный монтаж
Тип корпуса
TSSOP
Тип источника питания
Двойной, одиночный
Тип выхода
Открытый коллектор
Количество каналов на ИС
2
Типичное время реагирования
1.3мкс
Число контактов
8
Типичное одиночное напряжение питания
3 → 28 В
Размеры
3 x 4.4 x 1.15мм
Длина
3мм
Ширина
4.4мм
Высота
1.15мм
Типичное двойное напряжение питания
±12 V, ±15 V, ±3 V, ±5 V, ±9 V
Типичное усиление по напряжению
100 дБ
Минимальная рабочая температура
-40 °C
Максимальная рабочая температура
+125 °C
Страна происхождения
Malaysia
Информация о товаре
LMx93/LM2903 family Dual Comparators
The Texas Instruments LM193, LM293, LM393 and LM2903 are dual differential input voltage comparators designed to operate from a single power supply over a wide range of voltages. The common mode input voltage range includes ground and the devices have open collector outputs.
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.