TE Connectivity URHR-3-CS-2065-0 Кабельный зажим

Код товара RS: 441-4380Бренд: TE ConnectivityПарт-номер производителя: URHR-3-CS-2065-0
brand-logo
View all in Резиновые втулки

Техническая документация

Характеристики

Brand

TE Connectivity

Вид зажима/фиксатора кабеля

Термоусадочные втулки

Страна происхождения

United States

Информация о товаре

Cable Clamp Heat Shrink Grommets

ShrinkHoop™ grommet (URHR) is a high ratio heat-shrinkable strain-relief grommet that can be placed over the cable assembly after the connector pinning operation is complete. Shrunk down, these rings are highly conformable and fill the space between the clamp-type connector assembly and the cable. Re-entry is a simple operation, simply soften the ShrinkHoop™ grommet by heating and enlarge the ring by inserting a non-metallic probe through the centre of the wire bundle. The grommet will remain enlarged on cooling, allowing wires to be added, removed or reworked. Once rework is completed, simply heat the grommet until it shrinks down again before positioning and clamping back into place.

Standards

MIL-I-81765/1 Type 1

Информация о наличии не успела загрузиться

Пожалуйста, перезагрузите страницу (ctrl+F5)

Информация о наличии не успела загрузиться

P.O.A.

TE Connectivity URHR-3-CS-2065-0 Кабельный зажим

10

Доступно в кратности 10
10P.O.A.
20P.O.A.
30P.O.A.
40P.O.A.
50P.O.A.
60P.O.A.
70P.O.A.
80P.O.A.
90P.O.A.
100P.O.A.
110P.O.A.
120P.O.A.
130P.O.A.
140P.O.A.
150P.O.A.

P.O.A.

TE Connectivity URHR-3-CS-2065-0 Кабельный зажим
Информация о наличии не успела загрузиться

10

Доступно в кратности 10
10P.O.A.
20P.O.A.
30P.O.A.
40P.O.A.
50P.O.A.
60P.O.A.
70P.O.A.
80P.O.A.
90P.O.A.
100P.O.A.
110P.O.A.
120P.O.A.
130P.O.A.
140P.O.A.
150P.O.A.

Купить большой партией

КоличествоЦена единицы
10 - 90P.O.A.
100 - 240P.O.A.
250 - 490P.O.A.
500 - 990P.O.A.
1000+P.O.A.

Техническая документация

Характеристики

Brand

TE Connectivity

Вид зажима/фиксатора кабеля

Термоусадочные втулки

Страна происхождения

United States

Информация о товаре

Cable Clamp Heat Shrink Grommets

ShrinkHoop™ grommet (URHR) is a high ratio heat-shrinkable strain-relief grommet that can be placed over the cable assembly after the connector pinning operation is complete. Shrunk down, these rings are highly conformable and fill the space between the clamp-type connector assembly and the cable. Re-entry is a simple operation, simply soften the ShrinkHoop™ grommet by heating and enlarge the ring by inserting a non-metallic probe through the centre of the wire bundle. The grommet will remain enlarged on cooling, allowing wires to be added, removed or reworked. Once rework is completed, simply heat the grommet until it shrinks down again before positioning and clamping back into place.

Standards

MIL-I-81765/1 Type 1