TE Connectivity DS-18-22-RS Стыковой соединитель для проводов
Техническая документация
Характеристики
Brand
TE ConnectivityТип соединения
Стык
Размер провода
22 → 18 AWG
Габаритная длина
36мм
Minimum Wire Size AWG
18AWG
Диаметр
3.7мм
Изоляция
С изоляцией
Maximum Wire Size AWG
22AWG
Цвет
Красный
Серия
DuraSeal
Материал контактов
Медь
Покрытие контактов
Олово
Страна происхождения
Mexico
Информация о товаре
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
тг 7 375,50
тг 147,51 Each (In a Pack of 50) (ex VAT)
50
тг 7 375,50
тг 147,51 Each (In a Pack of 50) (ex VAT)
50
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
| Количество | Цена единицы | Per Упаковка |
|---|---|---|
| 50 - 200 | тг 147,51 | тг 7 375,50 |
| 250 - 1200 | тг 125,16 | тг 6 258,00 |
| 1250 - 2450 | тг 102,81 | тг 5 140,50 |
| 2500 - 4950 | тг 89,40 | тг 4 470,00 |
| 5000+ | тг 75,99 | тг 3 799,50 |
Техническая документация
Характеристики
Brand
TE ConnectivityТип соединения
Стык
Размер провода
22 → 18 AWG
Габаритная длина
36мм
Minimum Wire Size AWG
18AWG
Диаметр
3.7мм
Изоляция
С изоляцией
Maximum Wire Size AWG
22AWG
Цвет
Красный
Серия
DuraSeal
Материал контактов
Медь
Покрытие контактов
Олово
Страна происхождения
Mexico
Информация о товаре
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed