TE Connectivity B-106-8401 Обжимной штепсельный разъем
Техническая документация
Характеристики
Brand
TE ConnectivityСерия
DuraSeal
Изоляция
С изоляцией
Изоляционный материал
Нейлон
Габаритная длина
30мм
Тип соединителя
Гнездо
Minimum Wire Size mm²
0.5mm²
Maximum Wire Size mm²
1mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Диаметр штепселя
4мм
Цвет
Красный
Покрытие контактов
Олово
Материал контактов
Сплав меди
Страна происхождения
Mexico
Информация о товаре
Duraseal - Bullet Terminal
Duraseal bullet terminal constructed of tin plated brass with a heat shrinkable insulation sleeve.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
TE ConnectivityСерия
DuraSeal
Изоляция
С изоляцией
Изоляционный материал
Нейлон
Габаритная длина
30мм
Тип соединителя
Гнездо
Minimum Wire Size mm²
0.5mm²
Maximum Wire Size mm²
1mm²
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Диаметр штепселя
4мм
Цвет
Красный
Покрытие контактов
Олово
Материал контактов
Сплав меди
Страна происхождения
Mexico
Информация о товаре
Duraseal - Bullet Terminal
Duraseal bullet terminal constructed of tin plated brass with a heat shrinkable insulation sleeve.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed