TE Connectivity AMPMODU MTE Series Male Crimp Terminal, 26AWG Min, 22AWG Max
Техническая документация
Характеристики
Brand
TE ConnectivityТип соединителя
Вилка
Для использования с
Корпус разъема AMPMODU MTE
Серия
AMPMODU MTE
Minimum Wire Size mm²
0.1mm²
Метод оконцовки
Обжим
Maximum Wire Size mm²
0.4mm²
Покрытие контактов
Золотой
Minimum Wire Size AWG
26AWG
Материал контактов
Фосфористая бронза
Maximum Wire Size AWG
22AWG
Максимальное сопротивление контакта
12мОм
Минимальная рабочая температура
-65°C
Максимальная рабочая температура
+105°C
Информация о товаре
TE Connectivity AMPMODU MTE Contacts and Extraction/Lance Reset Tool
AMPMODU MTE interchangebale wire crimp (snap-in) contacts for use in AMPMODU MTE unloaded housings. These AMPMODU MTE IDC contacts have a standard applied pressure and are made from phosphor bronze with a choice of platings and wire size ranges.
Stock numbers 452-599 and 864-3620 are extraction/lance reset tools for removing contacts from the housings and resetting the depressed contact locking lances of the removed contact. Stock number 452-599 has a tip height of 0.46mm, stock number 864-3620 has a tip height of 1.02mm. Both tools have a 0.81mm tip width and a 21° lance reset angle.
TE Connectivity AMPMODU MTE Interconnection System
AMPMODU MTE 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTE connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTE IDC connectors can be quickly assembled to discrete wire. The AMPMODU MTE connector system consists of single row receptacle housings preloaded with IDC contacts and PCB headers. Coupling shrouds are also available which allow the ganging of connectors to form larger single row or double row connectors
P.O.A.
Each (Supplied on a Reel) (ex VAT)
Производственная упаковка (Катушка )
50
P.O.A.
Each (Supplied on a Reel) (ex VAT)
Производственная упаковка (Катушка )
50
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
Техническая документация
Характеристики
Brand
TE ConnectivityТип соединителя
Вилка
Для использования с
Корпус разъема AMPMODU MTE
Серия
AMPMODU MTE
Minimum Wire Size mm²
0.1mm²
Метод оконцовки
Обжим
Maximum Wire Size mm²
0.4mm²
Покрытие контактов
Золотой
Minimum Wire Size AWG
26AWG
Материал контактов
Фосфористая бронза
Maximum Wire Size AWG
22AWG
Максимальное сопротивление контакта
12мОм
Минимальная рабочая температура
-65°C
Максимальная рабочая температура
+105°C
Информация о товаре
TE Connectivity AMPMODU MTE Contacts and Extraction/Lance Reset Tool
AMPMODU MTE interchangebale wire crimp (snap-in) contacts for use in AMPMODU MTE unloaded housings. These AMPMODU MTE IDC contacts have a standard applied pressure and are made from phosphor bronze with a choice of platings and wire size ranges.
Stock numbers 452-599 and 864-3620 are extraction/lance reset tools for removing contacts from the housings and resetting the depressed contact locking lances of the removed contact. Stock number 452-599 has a tip height of 0.46mm, stock number 864-3620 has a tip height of 1.02mm. Both tools have a 0.81mm tip width and a 21° lance reset angle.
TE Connectivity AMPMODU MTE Interconnection System
AMPMODU MTE 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTE connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTE IDC connectors can be quickly assembled to discrete wire. The AMPMODU MTE connector system consists of single row receptacle housings preloaded with IDC contacts and PCB headers. Coupling shrouds are also available which allow the ganging of connectors to form larger single row or double row connectors