TE Connectivity 3-644540-6 Разъем IDC
Техническая документация
Характеристики
Brand
TE ConnectivityКоличество контактов
6
Количество рядов
1
Тип соединителя
Гнездо
Шаг
2.54мм
Тип монтажа
Монтаж на кабель
Ориентация корпуса
Прямой
Метод оконцовки
IDC
Номинальный ток
5A
Покрытие контактов
Олово
Серия
MTA-100
Минимальная рабочая температура
-55.0°C
Максимальная рабочая температура
105.0°C
Номинальное напряжение
250,0 в перем. Тока
Материал корпуса
Нейлон
Материал контактов
Медь
Страна происхождения
China
Информация о товаре
TE Connectivity MTA-100 IDC Feed-Thru Connectors
MTA-100 IDC Feed-Thru Connectors with a 2.54mm centreline pre-loaded with IDC contacts. These MTA-100 IDC Feed-Thru Connectors are end to end stackable and have moulded ribs on the housings to prevent reverse mating.
MTA-100 IDC connectors with part numbers X-640620-X, X-640621-X and X-641653-X are without polarizing tabs.
MTA-100 IDC connectors with part numbers X-644540-X and X-644563-X have polarizing tabs.
For mating connectors see stock numbers 535-5080, 719-6470 and 361-7033 typically.
TE Connectivity MTA-100 2.54mm Interconnect System
MTA-100 (Mass Termination Assembly) 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-100 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTA-100 IDC connectors can be quickly assembled to 28 AWG to 22 AWG discrete wire or notched ribbon cable. The MTA-100 connector system consists of female IDC connectors and PCB headers. The housings of the IDC connectors are colour coded according to wire size.
P.O.A.
1
P.O.A.
Информация о наличии не успела загрузиться
1
Информация о наличии не успела загрузиться
Техническая документация
Характеристики
Brand
TE ConnectivityКоличество контактов
6
Количество рядов
1
Тип соединителя
Гнездо
Шаг
2.54мм
Тип монтажа
Монтаж на кабель
Ориентация корпуса
Прямой
Метод оконцовки
IDC
Номинальный ток
5A
Покрытие контактов
Олово
Серия
MTA-100
Минимальная рабочая температура
-55.0°C
Максимальная рабочая температура
105.0°C
Номинальное напряжение
250,0 в перем. Тока
Материал корпуса
Нейлон
Материал контактов
Медь
Страна происхождения
China
Информация о товаре
TE Connectivity MTA-100 IDC Feed-Thru Connectors
MTA-100 IDC Feed-Thru Connectors with a 2.54mm centreline pre-loaded with IDC contacts. These MTA-100 IDC Feed-Thru Connectors are end to end stackable and have moulded ribs on the housings to prevent reverse mating.
MTA-100 IDC connectors with part numbers X-640620-X, X-640621-X and X-641653-X are without polarizing tabs.
MTA-100 IDC connectors with part numbers X-644540-X and X-644563-X have polarizing tabs.
For mating connectors see stock numbers 535-5080, 719-6470 and 361-7033 typically.
TE Connectivity MTA-100 2.54mm Interconnect System
MTA-100 (Mass Termination Assembly) 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-100 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTA-100 IDC connectors can be quickly assembled to 28 AWG to 22 AWG discrete wire or notched ribbon cable. The MTA-100 connector system consists of female IDC connectors and PCB headers. The housings of the IDC connectors are colour coded according to wire size.