TE Connectivity 202K121-25-0 Штампованный чехол кабеля
Техническая документация
Характеристики
Brand
TE ConnectivityТип
Прямой
Inside Diameter Primary
24mm
Inside Diameter Secondary
24mm
С клеевой подкладкой
Нет
Материал
Стойкий к воде эластомер
Количество пробоев
1
Цвет
Черный
Минимальная рабочая температура
-75°C
Максимальная рабочая температура
+150°C
Shrunk Diameter Primary
10.4mm
Shrunk Diameter Secondary
5.6mm
Страна происхождения
Mexico
Информация о товаре
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.
тг 4 183,92
тг 4 183,92 Each (ex VAT)
1
тг 4 183,92
тг 4 183,92 Each (ex VAT)
1
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
| Количество | Цена единицы |
|---|---|
| 1 - 14 | тг 4 183,92 |
| 15 - 49 | тг 4 023,00 |
| 50+ | тг 3 589,41 |
Техническая документация
Характеристики
Brand
TE ConnectivityТип
Прямой
Inside Diameter Primary
24mm
Inside Diameter Secondary
24mm
С клеевой подкладкой
Нет
Материал
Стойкий к воде эластомер
Количество пробоев
1
Цвет
Черный
Минимальная рабочая температура
-75°C
Максимальная рабочая температура
+150°C
Shrunk Diameter Primary
10.4mm
Shrunk Diameter Secondary
5.6mm
Страна происхождения
Mexico
Информация о товаре
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.