Техническая документация
Характеристики
Brand
Sprint ElectricТип продукции
Контроллер двигателя постоянного тока
Функция управления
Speed Controller
Выходное напряжение
24 V dc
Напряжение питания
24 V dc
Номинальный ток
8 A
Габаритная длина
60мм
Габаритная ширина
105мм
Полная глубина
120mm
Минимальная рабочая температура
0°C
Максимальная рабочая температура
40°C
Стандарты/одобрения
Нет
Страна происхождения
United Kingdom
Информация о товаре
Sprint Electric DC Motor Controller - XLV Range
The XLV range of DC servo controllers are designed for use with permanent magnet brushed DC servo motors rated from 4 to 12 amps, offered in a compact easy to use DIN rail mounting package.
The controllers can be used in either current (torque) or speed control modes. For highly dynamic applications, a shaft-mounted DC tacho-generator is recommended for speed feedback but in less demanding applications, armature voltage feedback (Avf) can be used.
The reference signal for both current and speed control can be either bipolar (10V) or unipolar (0 – 10V). Motor speed can be controlled in both forward and reverse directions. An adjustable current limit and fast-acting current control loop protect the controller and motor from sustained overloads.
Информация о наличии не успела загрузиться
тг 177 762,96
тг 177 762,96 Each (ex VAT)
1
тг 177 762,96
тг 177 762,96 Each (ex VAT)
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
Sprint ElectricТип продукции
Контроллер двигателя постоянного тока
Функция управления
Speed Controller
Выходное напряжение
24 V dc
Напряжение питания
24 V dc
Номинальный ток
8 A
Габаритная длина
60мм
Габаритная ширина
105мм
Полная глубина
120mm
Минимальная рабочая температура
0°C
Максимальная рабочая температура
40°C
Стандарты/одобрения
Нет
Страна происхождения
United Kingdom
Информация о товаре
Sprint Electric DC Motor Controller - XLV Range
The XLV range of DC servo controllers are designed for use with permanent magnet brushed DC servo motors rated from 4 to 12 amps, offered in a compact easy to use DIN rail mounting package.
The controllers can be used in either current (torque) or speed control modes. For highly dynamic applications, a shaft-mounted DC tacho-generator is recommended for speed feedback but in less demanding applications, armature voltage feedback (Avf) can be used.
The reference signal for both current and speed control can be either bipolar (10V) or unipolar (0 – 10V). Motor speed can be controlled in both forward and reverse directions. An adjustable current limit and fast-acting current control loop protect the controller and motor from sustained overloads.
