UNELVENT 017000 - PBB/4-450 Вентилятор
Техническая документация
Характеристики
Brand
Soler&PalauВоздушный поток
6700м³/ч
Тип вентилятора
Напольный, для тяжелых условий
Количество скоростей
3
Тип штекера
Тип C - европейская вилка
Напряжение питания
230 V
Размеры
925 x 650 x 560мм
Глубина
560мм
Высота
925мм
Ширина
650мм
Максимальная сила тока
2.3A
Страна происхождения
Spain
Информация о товаре
Unelevent Portable Cooling Fans
A range of industrial cooling fans designed to provide high volumes of air.
The fan casing is formed from heavy gauge rolled sheet steel with the motor support manufactured from steel rod and electro-welded for increased strength. The fan assembly is supported by a robust cold formed tubular steel stand. The whole assembly is protected by cataforesis primer and black polyester paint finish.
Plastic impellers are dynamically balanced and manufactured in a UV stabilised injection moulded plastic. They are also reinforced with fibreglass and are resistant to many chemical and abrasive airstreams.
All models are fitted with robust steel wire finger guards on both the inlet and outlet sides of the fan.
All wiring connections are made via an IP65 rated terminal box fixed to the exterior of the casing and provided with 2 poles On/Off switch.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
Soler&PalauВоздушный поток
6700м³/ч
Тип вентилятора
Напольный, для тяжелых условий
Количество скоростей
3
Тип штекера
Тип C - европейская вилка
Напряжение питания
230 V
Размеры
925 x 650 x 560мм
Глубина
560мм
Высота
925мм
Ширина
650мм
Максимальная сила тока
2.3A
Страна происхождения
Spain
Информация о товаре
Unelevent Portable Cooling Fans
A range of industrial cooling fans designed to provide high volumes of air.
The fan casing is formed from heavy gauge rolled sheet steel with the motor support manufactured from steel rod and electro-welded for increased strength. The fan assembly is supported by a robust cold formed tubular steel stand. The whole assembly is protected by cataforesis primer and black polyester paint finish.
Plastic impellers are dynamically balanced and manufactured in a UV stabilised injection moulded plastic. They are also reinforced with fibreglass and are resistant to many chemical and abrasive airstreams.
All models are fitted with robust steel wire finger guards on both the inlet and outlet sides of the fan.
All wiring connections are made via an IP65 rated terminal box fixed to the exterior of the casing and provided with 2 poles On/Off switch.