Техническая документация
Характеристики
Тип источника питания
Одинарный
Типичное одиночное напряжение питания
3 → 5,5 В
Количество каналов на ИС
2
Тип выхода
Дифференциальный
Максимальный ток питания
5,5 мА
Тип монтажа
Монтаж на плату в отверстия
Тип корпуса
DIP
Число контактов
8
Размеры
9.9 x 6.6 x 3.44мм
Высота
3.44мм
Длина
9.9мм
Максимальное рабочее напряжение питания
5,5 В
Минимальная рабочая температура
-40 °C
Максимальная рабочая температура
+125 °C
Ширина
6.6мм
Минимальное рабочее напряжение питания
3 В
Страна происхождения
Thailand
Информация о товаре
Si8920 Isolated Amplifier for Current Shunt Measurement
The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.
Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.
High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.
To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
2
P.O.A.
2
Техническая документация
Характеристики
Тип источника питания
Одинарный
Типичное одиночное напряжение питания
3 → 5,5 В
Количество каналов на ИС
2
Тип выхода
Дифференциальный
Максимальный ток питания
5,5 мА
Тип монтажа
Монтаж на плату в отверстия
Тип корпуса
DIP
Число контактов
8
Размеры
9.9 x 6.6 x 3.44мм
Высота
3.44мм
Длина
9.9мм
Максимальное рабочее напряжение питания
5,5 В
Минимальная рабочая температура
-40 °C
Максимальная рабочая температура
+125 °C
Ширина
6.6мм
Минимальное рабочее напряжение питания
3 В
Страна происхождения
Thailand
Информация о товаре
Si8920 Isolated Amplifier for Current Shunt Measurement
The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.
Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.
High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.
To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.