Silicon Labs Si8920BC-IP Устройство контроля токового шунта

Код товара RS: 169-0204Бренд: Skyworks Solutions IncПарт-номер производителя: SI8920BC-IP
brand-logo

Техническая документация

Характеристики

Тип источника питания

Одинарный

Типичное одиночное напряжение питания

3 → 5,5 В

Количество каналов на ИС

2

Тип выхода

Дифференциальный

Максимальный ток питания

5,5 мА

Тип монтажа

Монтаж на плату в отверстия

Тип корпуса

DIP

Число контактов

8

Размеры

9.9 x 6.6 x 3.44мм

Высота

3.44мм

Длина

9.9мм

Максимальное рабочее напряжение питания

5,5 В

Ширина

6.6мм

Минимальная рабочая температура

-40 °C

Минимальное рабочее напряжение питания

3 В

Максимальная рабочая температура

+125 °C

Страна происхождения

Thailand

Информация о товаре

Si8920 Isolated Amplifier for Current Shunt Measurement

The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.

Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.

High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.

To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.

P.O.A.

Silicon Labs Si8920BC-IP Устройство контроля токового шунта

P.O.A.

Silicon Labs Si8920BC-IP Устройство контроля токового шунта

Информация о наличии не успела загрузиться

Информация о наличии не успела загрузиться

Техническая документация

Характеристики

Тип источника питания

Одинарный

Типичное одиночное напряжение питания

3 → 5,5 В

Количество каналов на ИС

2

Тип выхода

Дифференциальный

Максимальный ток питания

5,5 мА

Тип монтажа

Монтаж на плату в отверстия

Тип корпуса

DIP

Число контактов

8

Размеры

9.9 x 6.6 x 3.44мм

Высота

3.44мм

Длина

9.9мм

Максимальное рабочее напряжение питания

5,5 В

Ширина

6.6мм

Минимальная рабочая температура

-40 °C

Минимальное рабочее напряжение питания

3 В

Максимальная рабочая температура

+125 °C

Страна происхождения

Thailand

Информация о товаре

Si8920 Isolated Amplifier for Current Shunt Measurement

The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.

Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.

High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.

To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.