Техническая документация
Характеристики
Brand
SiemensНоминальный ток
25 → 100 A
Защитный компонент двигателя
Базовый блок
Напряжение питания
230 В перем. тока
Защитная система двигателя
SIMOCODE-DP
Количество входов
4
Выход
4
Тип чувствительного элемента
Термистор
Габаритная длина
85мм
Габаритная ширина
70мм
Полная глубина
132.5мм
Минимальная рабочая температура
-25°C
Максимальная рабочая температура
+60°C
Информация о товаре
Simocode Motor Protection System
The Simocode provides a motor control solution within a fully integrated Profibus DP-based system. It is a programmable electronic overload device that is capable of protecting AC motors by monitoring motor phase current and winding temperature. Contactor control is achieved via output relays, with serial communication via a Profibus bus system. The device is typically used in a Motor Control Centre (MCC) to provide intelligent control.,The Simocode can be used as part of a larger control system, enabling the motor control functions to be monitored and controlled from a remote location. The Simocode can also be used as an independent protection device without needing to communicate to a higher level system. It contains all the necessary programmable logic functions to protect the motor and control the local starter components.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
SiemensНоминальный ток
25 → 100 A
Защитный компонент двигателя
Базовый блок
Напряжение питания
230 В перем. тока
Защитная система двигателя
SIMOCODE-DP
Количество входов
4
Выход
4
Тип чувствительного элемента
Термистор
Габаритная длина
85мм
Габаритная ширина
70мм
Полная глубина
132.5мм
Минимальная рабочая температура
-25°C
Максимальная рабочая температура
+60°C
Информация о товаре
Simocode Motor Protection System
The Simocode provides a motor control solution within a fully integrated Profibus DP-based system. It is a programmable electronic overload device that is capable of protecting AC motors by monitoring motor phase current and winding temperature. Contactor control is achieved via output relays, with serial communication via a Profibus bus system. The device is typically used in a Motor Control Centre (MCC) to provide intelligent control.,The Simocode can be used as part of a larger control system, enabling the motor control functions to be monitored and controlled from a remote location. The Simocode can also be used as an independent protection device without needing to communicate to a higher level system. It contains all the necessary programmable logic functions to protect the motor and control the local starter components.