Sensata / Crydom DRC3R40D420 Твердотельное реле
Техническая документация
Характеристики
Brand
Sensata / CrydomКоличество полюсов
3
Серия
DRC
Тип клеммы
Винт
Длина
45.3мм
Глубина
95.6mm
Вид монтажа
DIN Rail
Напряжение нагрузки
48 V ac → 400V ac
Минимальная рабочая температура
-30°C
Входной ток
12.5 mA → 32mA
Ток нагрузки
7.6A
Управляющее напряжение
18 V ac → 30 V ac, 18 V dc → 30 V dc
Максимальная рабочая температура
+80°C
Страна происхождения
Mexico
Информация о товаре
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.
Solid State Contactors
P.O.A.
1
P.O.A.
Информация о наличии не успела загрузиться
1
Информация о наличии не успела загрузиться
Техническая документация
Характеристики
Brand
Sensata / CrydomКоличество полюсов
3
Серия
DRC
Тип клеммы
Винт
Длина
45.3мм
Глубина
95.6mm
Вид монтажа
DIN Rail
Напряжение нагрузки
48 V ac → 400V ac
Минимальная рабочая температура
-30°C
Входной ток
12.5 mA → 32mA
Ток нагрузки
7.6A
Управляющее напряжение
18 V ac → 30 V ac, 18 V dc → 30 V dc
Максимальная рабочая температура
+80°C
Страна происхождения
Mexico
Информация о товаре
Crydom DRC Series Solid State Contactors
Crydom DRC Series Solid State Contactors are intended for frequently switching on and off three phase loads up to 5 HP. They are available in both contactor versions DRC3P and reversing contactor versions DRC3R.
DRC3P are available in either instantaneous turn-on (for Motor Control) or zero voltage turn-on (for Resistive Loads).
DRC3R include an interlock control that allows only off, forward and reverse operation in a safe mode: they switch
instantaneously upon application of the control voltage and when an instantaneous change of direction is commanded they will delay the direction change by 100m/sec in order to prevent simultaneous forward and reverse operations.
This unique solid state contactor can start/stop a 3 Phase AC Motor at a maximum switching frequency of 9000 cycles/hour.