Schneider Electric VW3A4552

Код товара RS: 797-0785Бренд: Schneider ElectricПарт-номер производителя: VW3A4552
brand-logo

Техническая документация

Характеристики

Тип принадлежностей

Choke

Для использования с

Altivar 12, Altivar 312, Altivar 312 Solar, Altivar 31C, Altivar 32, Altivar 61, Altivar 71, Lexium 05

Фаза электрического тока

3

Длина

155мм

Глубина

90мм

Размеры

155 x 130 x 90 мм

Страна происхождения

Hungary

Информация о товаре

Altivar AC Line Choke

A line choke can be used to provide improved protection against overvoltages on the line supply and to reduce the current harmonics produced by the drive. The recommended chokes can be used to limit the line current. They have been developed in line with standard EN 50178 (VDE 0160 level 1 high energy overvoltages on the line supply). The inductance values are defined for a voltage drop between phases of between 3% and 5% of the nominal line voltage. Values higher than this will cause loss of torque. These chokes should be installed upstream of the drive.

Информация о наличии не успела загрузиться

Пожалуйста, перезагрузите страницу (ctrl+F5)

Информация о наличии не успела загрузиться

P.O.A.

Schneider Electric VW3A4552

P.O.A.

Schneider Electric VW3A4552
Информация о наличии не успела загрузиться

Техническая документация

Характеристики

Тип принадлежностей

Choke

Для использования с

Altivar 12, Altivar 312, Altivar 312 Solar, Altivar 31C, Altivar 32, Altivar 61, Altivar 71, Lexium 05

Фаза электрического тока

3

Длина

155мм

Глубина

90мм

Размеры

155 x 130 x 90 мм

Страна происхождения

Hungary

Информация о товаре

Altivar AC Line Choke

A line choke can be used to provide improved protection against overvoltages on the line supply and to reduce the current harmonics produced by the drive. The recommended chokes can be used to limit the line current. They have been developed in line with standard EN 50178 (VDE 0160 level 1 high energy overvoltages on the line supply). The inductance values are defined for a voltage drop between phases of between 3% and 5% of the nominal line voltage. Values higher than this will cause loss of torque. These chokes should be installed upstream of the drive.