RS PRO Токоизмерительные клещи
Техническая документация
Характеристики
Brand
RS ProТип продукции
Clamp Meter
Дискретность сопротивления
100mΩ
Измерение максимального напряжения переменного тока
999V ac
Измерение максимального напряжения постоянного тока
600V
Измерение максимального сопротивления
400.0Ω
Номер модели
ICM135R
Maximum Jaw Opening
34 mm
Дискретность напряжения перем. тока
100mV
Точность по напряжению переменного тока
±1 % rdg + 5 Digits
Минимальная рабочая температура
0°C
Дискретность перем. тока
100mA
Точность по переменному току
±1.9 % rdg + 5 Digits
Точность измерения сопротивления
±1% rdg + 3 Digits Ω
Дискретность напряжения пост. тока
100 mV
Clamp Meter Type
AC Current Clamp Meter
Точность по напряжению постоянного тока
±0.7 % rdg + 2 Digits
Максимальная рабочая температура
50°C
Ширина
50 mm
Материал каски/сварочной маски
220мм
Длина
76мм
Вес
360g
Стандарты/одобрения
RoHS
Истинное среднеквадратичное значение
Да
Измеренные функции
Frequency, Resistance, Continuity, Diode Test, AC Voltage, DC Voltage, AC Current
Измерение максимального переменного тока
999A
Максимальный размер проводника
34 mm
Non-Contact Voltage Detector
Yes
Тип батарей
NEDA 1604, IEC 6F22
Тип дисплея
ЖК-дисплей
Срок службы батарей
300h
Уровень категории безопасности
КАТ III
Напряжение категории безопасности
600V
Источник питания
Батарея
Страна происхождения
Taiwan, Province Of China
Информация о товаре
RS PRO ICM135R True RMS Clampmeter
From the trusted RS PRO brand, this ICM133R clamp meter offers high specification performance in a rugged, low-cost unit. It has true RMS reading on AC mode to ensure accurate current measurement.
Battery-powered for maximum portability, and with a large backlit screen, this multifunction current clamp meter is ideal for on-the-go applications in almost any environment.
It is also supplied in a carry case to keep the clampmeter safe and secure during transit.
Features and Benefits
• 600 A ac measurement
• 600 V ac/dc voltage measurement
• 34 mm diameter conductor jaw capacity
• 4000 Count backlit LCD display with analogue bargraph
• True RMS reading on AC mode
• Resistance & continuity beeper < 30 Ω
• Display Hold & Min Max Function
• 10 ms Peak Hold on ac A & ac V
• Frequency Counter
• Auto Power Off (30 minutes)
• Separate battery compartment
• 600 V circuit protection
• Complies with EN61010 CAT III 600 V Safety Standard for industrial applications
Applications
This current clamp meter is designed for current measurement in electrical testing, and combines a digital multimeter with a clamping current sensor. The nature of the clamp means that it can fit around a wire at any point to sense AC and DC voltage as well as current. This has the advantage of allowing electricians to take a reading from a conductor without touching it, which is both more convenient and safer than other methods.
True RMS (Root Mean Square) reading has advantages over average RMS reading in that it compensates for interfering electronic loads or distorted sinewaves to give an accurate reading.
This current clamp is used for measuring high levels of current in service and maintenance applications. It can also be used when installing electrical equipment.
RS PRO aims to be your go-to brand when you need reliability, quality, and affordability. We source high-quality tools and parts from trusted sources and employ expert testing to build a brand you can rely on.
When it comes to test and measurement equipment, RS PRO has an extensive range of solutions. From electrical to environmental measurement, we offer calibrated and multi-function instruments to suit your needs.
Supplied with
Test leads, carry case, instruction leaflet and 9 V PP3 alkaline battery
Информация о наличии не успела загрузиться
P.O.A.
Calibration type
No Calibration
1
P.O.A.
Информация о наличии не успела загрузиться
Calibration type
No Calibration
1
Техническая документация
Характеристики
Brand
RS ProТип продукции
Clamp Meter
Дискретность сопротивления
100mΩ
Измерение максимального напряжения переменного тока
999V ac
Измерение максимального напряжения постоянного тока
600V
Измерение максимального сопротивления
400.0Ω
Номер модели
ICM135R
Maximum Jaw Opening
34 mm
Дискретность напряжения перем. тока
100mV
Точность по напряжению переменного тока
±1 % rdg + 5 Digits
Минимальная рабочая температура
0°C
Дискретность перем. тока
100mA
Точность по переменному току
±1.9 % rdg + 5 Digits
Точность измерения сопротивления
±1% rdg + 3 Digits Ω
Дискретность напряжения пост. тока
100 mV
Clamp Meter Type
AC Current Clamp Meter
Точность по напряжению постоянного тока
±0.7 % rdg + 2 Digits
Максимальная рабочая температура
50°C
Ширина
50 mm
Материал каски/сварочной маски
220мм
Длина
76мм
Вес
360g
Стандарты/одобрения
RoHS
Истинное среднеквадратичное значение
Да
Измеренные функции
Frequency, Resistance, Continuity, Diode Test, AC Voltage, DC Voltage, AC Current
Измерение максимального переменного тока
999A
Максимальный размер проводника
34 mm
Non-Contact Voltage Detector
Yes
Тип батарей
NEDA 1604, IEC 6F22
Тип дисплея
ЖК-дисплей
Срок службы батарей
300h
Уровень категории безопасности
КАТ III
Напряжение категории безопасности
600V
Источник питания
Батарея
Страна происхождения
Taiwan, Province Of China
Информация о товаре
RS PRO ICM135R True RMS Clampmeter
From the trusted RS PRO brand, this ICM133R clamp meter offers high specification performance in a rugged, low-cost unit. It has true RMS reading on AC mode to ensure accurate current measurement.
Battery-powered for maximum portability, and with a large backlit screen, this multifunction current clamp meter is ideal for on-the-go applications in almost any environment.
It is also supplied in a carry case to keep the clampmeter safe and secure during transit.
Features and Benefits
• 600 A ac measurement
• 600 V ac/dc voltage measurement
• 34 mm diameter conductor jaw capacity
• 4000 Count backlit LCD display with analogue bargraph
• True RMS reading on AC mode
• Resistance & continuity beeper < 30 Ω
• Display Hold & Min Max Function
• 10 ms Peak Hold on ac A & ac V
• Frequency Counter
• Auto Power Off (30 minutes)
• Separate battery compartment
• 600 V circuit protection
• Complies with EN61010 CAT III 600 V Safety Standard for industrial applications
Applications
This current clamp meter is designed for current measurement in electrical testing, and combines a digital multimeter with a clamping current sensor. The nature of the clamp means that it can fit around a wire at any point to sense AC and DC voltage as well as current. This has the advantage of allowing electricians to take a reading from a conductor without touching it, which is both more convenient and safer than other methods.
True RMS (Root Mean Square) reading has advantages over average RMS reading in that it compensates for interfering electronic loads or distorted sinewaves to give an accurate reading.
This current clamp is used for measuring high levels of current in service and maintenance applications. It can also be used when installing electrical equipment.
RS PRO aims to be your go-to brand when you need reliability, quality, and affordability. We source high-quality tools and parts from trusted sources and employ expert testing to build a brand you can rely on.
When it comes to test and measurement equipment, RS PRO has an extensive range of solutions. From electrical to environmental measurement, we offer calibrated and multi-function instruments to suit your needs.
Supplied with
Test leads, carry case, instruction leaflet and 9 V PP3 alkaline battery