RS PRO Process Pump Controller for Brushless Micropump, 6/28 V, 80 °C
Техническая документация
Характеристики
Brand
RS ProCompatible Pump Type
Brushless Micropump
Тип продукции
Process Pump Controller
Напряжение питания
6/28 V
Степень защиты
IP20
Maximum Fluid Temperature
80°C
Maximum Output Pressure
10bar
Стандарты/одобрения
CMRT, ISO 9001 Quality Control Standard, 3TG and REACH compliant, SVCH, RoHS Directive 2011/65/EU
Страна происхождения
United Kingdom
Информация о товаре
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.
Информация о наличии не успела загрузиться
P.O.A.
1
P.O.A.
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
RS ProCompatible Pump Type
Brushless Micropump
Тип продукции
Process Pump Controller
Напряжение питания
6/28 V
Степень защиты
IP20
Maximum Fluid Temperature
80°C
Maximum Output Pressure
10bar
Стандарты/одобрения
CMRT, ISO 9001 Quality Control Standard, 3TG and REACH compliant, SVCH, RoHS Directive 2011/65/EU
Страна происхождения
United Kingdom
Информация о товаре
Brushless Micro Pump Controller
A compact and highly efficient motor controller for the RS Pro range of centrifugal micro-pumps.
The EQi controller accepts and input voltage of up to 30 volts and pump speed can be controlled from a potentiometer on the board or via a 0-5v external signal. With voltages above 12v the controller works to maintain a constant flow despite the increase in back pressure helping to provide a flatter flow – pressure curve.
Installation is easy, simply wire the two input terminals, attach the three outputs to the micro-pump and set the jumper position for on board speed control or control via an external 0-5v signal.