RS PRO Metal Oxide Varistor 1.39nF, Clamping 710V, Varistor 430V
Техническая документация
Характеристики
Brand
RS ProНапряжение варистора
430V
Максимальное напряжение перем. тока
275V
Максимальное номинальное напряжение постоянного тока
370V
Напряжение фиксации
710V
Материал
Металл
Энергия
370J
Диаметр
28.5мм
Максимальный ток перегрузки
18000A
Емкость
1.39нФ
Длина
35.5мм
Толщина
9.2мм
Размеры
28.5 (Dia.) x 9.2мм
Шаг выводов
12.7мм
Страна происхождения
China
Информация о товаре
Thermally Protected MOV, Round, Three Leaded
Our RS Pro metal oxide varistors have been designed to meet the abnormal overvoltage requirements outlined in Section 39.4 of the UL1449 standard (4th edition). Under sustained voltage conditions, the Metal Oxide Varistor (MOV) lead that is connected to the thermal link opens. Meeting UL1449 4th edition requirements, these MOVs are ideal for surge protection devices without generating high cost or creating a complicated approach.
When used above their rated specification, traditional MOVs can fail to short circuit conditions or fail to open when exposed to sustained steady state overvoltage. However, the integrated thermal link used in our RS Pro range responds to temperature and voltage. This response ensures that when the MOV exceeds a certain temperature or voltage, the MOV disconnects from the line.
Our range of thermally protected MOVs react instantly to unexpected overvoltage situations and offer an excellent level of protection to components downstream. RS Pro MOVs are wave solderable, helping you to reduce cost by eliminating the rework caused by hand soldering operations.
The thermal link in our MOVs must only be used to provide protection to the varistor in cases of abnormal overvoltage. Never use a thermally protected varistor in series with the load. Our metal oxide varistors are intended for use in UL 1449 compliant surge protection device modules. However, your module design should allow for the possibility that under extreme overvoltage conditions some units may exhibit heating, arcing and venting before opening. We recommend application testing for this range.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
RS ProНапряжение варистора
430V
Максимальное напряжение перем. тока
275V
Максимальное номинальное напряжение постоянного тока
370V
Напряжение фиксации
710V
Материал
Металл
Энергия
370J
Диаметр
28.5мм
Максимальный ток перегрузки
18000A
Емкость
1.39нФ
Длина
35.5мм
Толщина
9.2мм
Размеры
28.5 (Dia.) x 9.2мм
Шаг выводов
12.7мм
Страна происхождения
China
Информация о товаре
Thermally Protected MOV, Round, Three Leaded
Our RS Pro metal oxide varistors have been designed to meet the abnormal overvoltage requirements outlined in Section 39.4 of the UL1449 standard (4th edition). Under sustained voltage conditions, the Metal Oxide Varistor (MOV) lead that is connected to the thermal link opens. Meeting UL1449 4th edition requirements, these MOVs are ideal for surge protection devices without generating high cost or creating a complicated approach.
When used above their rated specification, traditional MOVs can fail to short circuit conditions or fail to open when exposed to sustained steady state overvoltage. However, the integrated thermal link used in our RS Pro range responds to temperature and voltage. This response ensures that when the MOV exceeds a certain temperature or voltage, the MOV disconnects from the line.
Our range of thermally protected MOVs react instantly to unexpected overvoltage situations and offer an excellent level of protection to components downstream. RS Pro MOVs are wave solderable, helping you to reduce cost by eliminating the rework caused by hand soldering operations.
The thermal link in our MOVs must only be used to provide protection to the varistor in cases of abnormal overvoltage. Never use a thermally protected varistor in series with the load. Our metal oxide varistors are intended for use in UL 1449 compliant surge protection device modules. However, your module design should allow for the possibility that under extreme overvoltage conditions some units may exhibit heating, arcing and venting before opening. We recommend application testing for this range.