RS PRO Шаговый двигатель
Техническая документация
Характеристики
Brand
RS ProТип шагового двигателя
Гибрид, постоянный электромагнит
Угол шага
0.9°
Удерживающий момент
1.26Нм
Количество проводов
4
Напряжение питания
2.5 V
Размер кадра
56.4 x 56.4мм
Диаметр вала
6.35мм
Номинальный ток
2.8 A
Приспособление для наматывания
Униполярный
Длина вала
19мм
Глубина
56мм
Сопротивление на одной фазе
0.9Ом
Соблюдаемые стандарты
Соответствие нормам RoHS
Страна происхождения
China
Информация о товаре
High Torque Stepper Motor 57 x 57, 400 step
High Torque Hybrid Stepper Motors are motion systems allowing to have a high positioning precision.
With their high power already at low speed, their stall torque and the possibility to divide the steps in micro steps, stepper motors can provide direct and precise motions in a small volume.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include:
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
тг 30 337,89
Each (ex VAT)
1
тг 30 337,89
Each (ex VAT)
1
Техническая документация
Характеристики
Brand
RS ProТип шагового двигателя
Гибрид, постоянный электромагнит
Угол шага
0.9°
Удерживающий момент
1.26Нм
Количество проводов
4
Напряжение питания
2.5 V
Размер кадра
56.4 x 56.4мм
Диаметр вала
6.35мм
Номинальный ток
2.8 A
Приспособление для наматывания
Униполярный
Длина вала
19мм
Глубина
56мм
Сопротивление на одной фазе
0.9Ом
Соблюдаемые стандарты
Соответствие нормам RoHS
Страна происхождения
China
Информация о товаре
High Torque Stepper Motor 57 x 57, 400 step
High Torque Hybrid Stepper Motors are motion systems allowing to have a high positioning precision.
With their high power already at low speed, their stall torque and the possibility to divide the steps in micro steps, stepper motors can provide direct and precise motions in a small volume.
0.9° and 1.8° Hybrid Stepper Motors
1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per revolution). When correctly loaded and driven these motors will produce discrete output steps. The number of steps and speed of rotation are determined by the number of pulses and frequency of the input signal. This provides an ideal method for speed and position control. The motors are directly compatible with stepper motor drive boards.,Applications include: