RS PRO Клеммная колодка для разъединения
Техническая документация
Характеристики
Brand
RS ProЦвет
Черный
Количество уровней
Одинарный
Американский проволочный калибр AWG
22 → 11AWG
Серия
17150.4
Метод оконцовки
Винт
Номинальное напряжение
600 В
Номинальный ток
10 (IEC) A, 16 (cUL) A, 16 (UL) A
Минимальная рабочая температура
-40°C
Максимальная рабочая температура
+140°C
Информация о товаре
SSIK Series Fuse-Disconnect Terminals
The SSIK fuse-disconnect terminals, made from glass-fibre reinforced polyamide PA 6.6 V0, have an extended temperature range up to +140°C (RTI elec.) and open up new application possibilities in electrical engineering. They have good dimensional stability up to high temperature ranges.
The SSIK fuse-disconnect terminals feature an extraction lever that locks into its end position and allows a spare fuse to be attached from the side. The following micro-fuses can be attached: SSIC 4 (5x20/5x25/5x30) and SSIC 6 (6.3x25/6.3x32)
Two cross-connection channels within the fuse-disconnect terminals allow for potentials to be distributed to adjacent fused and feed-through terminals from the SRK series. For multiplying the potentials, we offer the SQI standard accessory, available with from 2 to 30 poles. An additional connection (an SMAG) can also be attached to the outlet side. Two or three extraction levers can be coupled and operated simultaneously by using the VBS connection sleeves.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
RS ProЦвет
Черный
Количество уровней
Одинарный
Американский проволочный калибр AWG
22 → 11AWG
Серия
17150.4
Метод оконцовки
Винт
Номинальное напряжение
600 В
Номинальный ток
10 (IEC) A, 16 (cUL) A, 16 (UL) A
Минимальная рабочая температура
-40°C
Максимальная рабочая температура
+140°C
Информация о товаре
SSIK Series Fuse-Disconnect Terminals
The SSIK fuse-disconnect terminals, made from glass-fibre reinforced polyamide PA 6.6 V0, have an extended temperature range up to +140°C (RTI elec.) and open up new application possibilities in electrical engineering. They have good dimensional stability up to high temperature ranges.
The SSIK fuse-disconnect terminals feature an extraction lever that locks into its end position and allows a spare fuse to be attached from the side. The following micro-fuses can be attached: SSIC 4 (5x20/5x25/5x30) and SSIC 6 (6.3x25/6.3x32)
Two cross-connection channels within the fuse-disconnect terminals allow for potentials to be distributed to adjacent fused and feed-through terminals from the SRK series. For multiplying the potentials, we offer the SQI standard accessory, available with from 2 to 30 poles. An additional connection (an SMAG) can also be attached to the outlet side. Two or three extraction levers can be coupled and operated simultaneously by using the VBS connection sleeves.