RS PRO Антистатическое устройство непрерывного контроля
Техническая документация
Характеристики
Brand
RS ProТип клеммы
Разъем Banana
Напряжение питания
5V
Высота
30мм
Количество операций
1
Длина
61мм
Количество рабочих поверхностей
1
Ширина
69мм
Контроль супервизоров
Да
Станции парковки
Нет
Определение заряда
Нет
Определение EOS
Да
Соответствует EN 61340-5-1
Да
Страна происхождения
United States
Информация о товаре
RS Pro Body Voltage Monitor
The RS Body Voltage Monitor is a single station continuous monitor for one operator, one ESD work surface and one tool ground. A second monitored jack is featured for use by a supervisor or second operator.
The Body Voltage Monitor uses Dual-Channel Voltage Monitoring Technology for true continuous monitoring (versus pulsed or intermittent). The Dual-Channel Voltage Monitoring Technology uses one lead of the dual-wire wrist strap (not included) to provide a path-to-ground for the operator while the other lead continuously monitors for voltage induced onto the operator greater than ±3 V dc. Voltage on the operator can be caused by strong AC fields in the work area or by other charge generators such as rolling a non-ESD safe chair.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Техническая документация
Характеристики
Brand
RS ProТип клеммы
Разъем Banana
Напряжение питания
5V
Высота
30мм
Количество операций
1
Длина
61мм
Количество рабочих поверхностей
1
Ширина
69мм
Контроль супервизоров
Да
Станции парковки
Нет
Определение заряда
Нет
Определение EOS
Да
Соответствует EN 61340-5-1
Да
Страна происхождения
United States
Информация о товаре
RS Pro Body Voltage Monitor
The RS Body Voltage Monitor is a single station continuous monitor for one operator, one ESD work surface and one tool ground. A second monitored jack is featured for use by a supervisor or second operator.
The Body Voltage Monitor uses Dual-Channel Voltage Monitoring Technology for true continuous monitoring (versus pulsed or intermittent). The Dual-Channel Voltage Monitoring Technology uses one lead of the dual-wire wrist strap (not included) to provide a path-to-ground for the operator while the other lead continuously monitors for voltage induced onto the operator greater than ±3 V dc. Voltage on the operator can be caused by strong AC fields in the work area or by other charge generators such as rolling a non-ESD safe chair.