ST4 spring cage through terminal clamp
Техническая документация
Характеристики
Brand
Phoenix ContactЦвет
Серый
Количество уровней
Одинарный
Американский проволочный калибр AWG
28 → 10AWG (американский проволочный калибр)
Серия
ST 4
Метод оконцовки
Пружинный зажим
CSA кабеля
0.2 → 6мм²
Номинальное напряжение
800 V
Номинальный ток
41A
Минимальная рабочая температура
-60°C
Максимальная рабочая температура
+110°C
Соблюдаемые стандарты
EAC
Номер модели
ST 4
Страна происхождения
Germany
Информация о товаре
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
тг 1 832,70
тг 366,54 Each (In a Pack of 5) (ex VAT)
5
тг 1 832,70
тг 366,54 Each (In a Pack of 5) (ex VAT)
5
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
Техническая документация
Характеристики
Brand
Phoenix ContactЦвет
Серый
Количество уровней
Одинарный
Американский проволочный калибр AWG
28 → 10AWG (американский проволочный калибр)
Серия
ST 4
Метод оконцовки
Пружинный зажим
CSA кабеля
0.2 → 6мм²
Номинальное напряжение
800 V
Номинальный ток
41A
Минимальная рабочая температура
-60°C
Максимальная рабочая температура
+110°C
Соблюдаемые стандарты
EAC
Номер модели
ST 4
Страна происхождения
Germany
Информация о товаре
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².