Phoenix Contact 2902850 Настраиваемый преобразователь температуры
Техническая документация
Характеристики
Brand
Phoenix ContactВходной диапазон
0 → 4000 Ω, -200 → +850°C
Тип монтажа
DIN-рейка
Диапазон рабочих температур
-20 → +65°C
Серия
3RS70
Минимальная рабочая температура
-20°C
Максимальная рабочая температура
+65°C
Страна происхождения
Germany
Информация о товаре
Configurable Resistance Thermometer Transducer
The 2902849 from Phoenix Contact is a 3-way, configurable isolated temperature transducer. This temperature transducer is designed to be used with resistance thermometers and remote resistance type sensors in 2,3 and 4-wire connections. 2902849 also allows easy customisation and configuration either by the DIP switch located on the side of the module or via the S port using FGT/DTM software. Not to mention, this module is rated to be installed in zone 2 areas.
This device also contains a red LED to allow for easy error diagnostics. It will flash or stay static depending on the error.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
тг 74 282,46
Each (ex VAT)
1
тг 74 282,46
Each (ex VAT)
1
Техническая документация
Характеристики
Brand
Phoenix ContactВходной диапазон
0 → 4000 Ω, -200 → +850°C
Тип монтажа
DIN-рейка
Диапазон рабочих температур
-20 → +65°C
Серия
3RS70
Минимальная рабочая температура
-20°C
Максимальная рабочая температура
+65°C
Страна происхождения
Germany
Информация о товаре
Configurable Resistance Thermometer Transducer
The 2902849 from Phoenix Contact is a 3-way, configurable isolated temperature transducer. This temperature transducer is designed to be used with resistance thermometers and remote resistance type sensors in 2,3 and 4-wire connections. 2902849 also allows easy customisation and configuration either by the DIP switch located on the side of the module or via the S port using FGT/DTM software. Not to mention, this module is rated to be installed in zone 2 areas.
This device also contains a red LED to allow for easy error diagnostics. It will flash or stay static depending on the error.