Surge protection controller for PSU
Техническая документация
Характеристики
Brand
Phoenix ContactТип продукции
Стабилизатор напряжения
Тип ограничителя напряжения
Surge Arrester Protection Module
Максимальное напряжение
24V
Тип монтажа
DIN-рейка
Серия
PT-IQ
Минимальная рабочая температура
-40°C
Максимальная рабочая температура
70°C
Длина
17.7мм
Материал каски/сварочной маски
91.1mm
Глубина
77.5mm
Стандарты/одобрения
EN 60079-11, IEC 60079-11
Сертификация опасной зоны
Нет
Страна происхождения
Germany
Информация о товаре
PLUGTRAB PT- IQ Surge Protection System
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Информация о наличии не успела загрузиться
тг 72 270,96
тг 72 270,96 Each (ex VAT)
1
тг 72 270,96
тг 72 270,96 Each (ex VAT)
Информация о наличии не успела загрузиться
1
Техническая документация
Характеристики
Brand
Phoenix ContactТип продукции
Стабилизатор напряжения
Тип ограничителя напряжения
Surge Arrester Protection Module
Максимальное напряжение
24V
Тип монтажа
DIN-рейка
Серия
PT-IQ
Минимальная рабочая температура
-40°C
Максимальная рабочая температура
70°C
Длина
17.7мм
Материал каски/сварочной маски
91.1mm
Глубина
77.5mm
Стандарты/одобрения
EN 60079-11, IEC 60079-11
Сертификация опасной зоны
Нет
Страна происхождения
Germany
Информация о товаре
PLUGTRAB PT- IQ Surge Protection System
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.