Техническая документация
Характеристики
Brand
OsramВыходное напряжение
38 → 120V
Максимальная выходная мощность
45W
Выходной ток
100 mA, 700 mA
Входное напряжение
195 → 264 В
Тип выхода
Стабилизированный ток
Входное напряжение переменного или постоянного тока
ac
Степень защиты
IP20
Серия
OPTOTRONIC OT
Номинальное напряжение
195 → 264V
Информация о товаре
OPTOTRONIC 700mA Constant Current LED Drivers with LEDset Interface
These constant current OPTOTRONIC LED drivers from Osram, are fully variable between 100 and 700mA to drive any LED module or OLED panel (such as stock no. 727-2413), by simple potential divider network or potentiometer. Alternatively, for Osram LEDset LED modules, a simple cable between the driver and the LED module will automatically set the correct drive current. The LEDset input terminal on the OPTOTRONIC LED driver can also be used to utilise feedback from thermal or ambient light sensors to vary the drive current and therefore the light output of the modules automatically.
Информация о наличии не успела загрузиться
Пожалуйста, перезагрузите страницу (ctrl+F5)
P.O.A.
1
P.O.A.
1
Купить большой партией
Количество | Цена единицы |
---|---|
1 - 1 | P.O.A. |
2 - 4 | P.O.A. |
5+ | P.O.A. |
Техническая документация
Характеристики
Brand
OsramВыходное напряжение
38 → 120V
Максимальная выходная мощность
45W
Выходной ток
100 mA, 700 mA
Входное напряжение
195 → 264 В
Тип выхода
Стабилизированный ток
Входное напряжение переменного или постоянного тока
ac
Степень защиты
IP20
Серия
OPTOTRONIC OT
Номинальное напряжение
195 → 264V
Информация о товаре
OPTOTRONIC 700mA Constant Current LED Drivers with LEDset Interface
These constant current OPTOTRONIC LED drivers from Osram, are fully variable between 100 and 700mA to drive any LED module or OLED panel (such as stock no. 727-2413), by simple potential divider network or potentiometer. Alternatively, for Osram LEDset LED modules, a simple cable between the driver and the LED module will automatically set the correct drive current. The LEDset input terminal on the OPTOTRONIC LED driver can also be used to utilise feedback from thermal or ambient light sensors to vary the drive current and therefore the light output of the modules automatically.